150m HDMI extenders with IR
1 Introduction:

HDMI over Ethernet is based on TCP/IP standard
It transmit your HD display with the high-resolution up to 395ft (120 meters) away from your HDMI or DVI-D source by using one Cat5e/6 cable
With the advantage of TCP/IP standard, you can extend your HD video to multiple displays by using an Ethernet switch

2 Features:

Ø Following TCP/IP standard
Ø Support HDMI1.3 protocol
Ø HDCP1.1 and 1.2 protocol compliant
Ø Support point-to-point mode, one point-to-many mode and cascade connection mode
Ø Support IR extender function allows IR remote control of source devices from remote viewing location by sending IR commands received in the vicinity of the display back to the source devices

Specifications:

HDTV resolution: 480, 576, 720, 1080P
Audio: sample rate: 32, 44.1 and 48kHz
IR remote control: 38kHz, NEC
HDMI: HDMI 1.3
HDCP: HDMI 1.2
Power adapter:

Input: 100V - 240V (50 - 60Hz)
Output: 5V/1A

Power consumption:

HDMI sender: 3W
HDMI receiver: 3W

Size (L x W x H): 110x75x25mm
Weight: 128g*2 pieces
Operating temperature/humidity: 0 - 70℃/10 - 80% RH (no condensation)
Storage temperature/humidity: -10  - 80℃/5 -90% RH (no condensation)

3.0 package contents:

Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
1)  Main unit No. 1 sender , Main unit No. 2 receivers
2)  Two pieces of 5V DC power supply
3)  A piece of IR transmitter and a pieces of IR receiver
4)  User’s manual

4, Connection and operating:

1) Connect the HDMI source (such as DVD, PS3, STB ) to the HDMI IN of sender
2) Connect the IR sender to the sender IR out port and be directed at HDMI video source’s IR receiver
3) Connect the HDMI out of receiver to HDTV display
4) Connect the IR receiver to the receiver IR in port
5) Use one Cat5e/6 cable up to 120m to connect the sender and receiver.
6) Plug two pieces of 5V power supply into the sender and receiver
7) Power-on the HDTV display and HDMI source