OB2000A is a new generation medium intensity obstruction  light,Compare with OB2000A it has better heat dissipation and efficiency is higher.
Our products work under AC voltage from 110V to 240V  Our products work under DC voltage from 24V to 60V. Itcomes with compact-size and light-weight, which makes installation job nice & easy.

OB2000A Medium intensity obstruction light （Type B） for marking Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions t air traffic with a flashing red safety light. Compliant to ICAO standard. 
The enclosure of OB2000A is made of die casting aluminum with powder coated finish, light weight, waterproof, shockproof and corrosion resistant. Self-contained wiring compartment, ease of mount. Steel wire is used to connect to base against falling in operation.

Specifications

Functions & Features
• Based on LED technology, meets optics standard. 
• Built-in circuit protect LED, extremely reliable and cost saving. 
• Shockproof and corrosion resistant. Working environment temperature ：-40℃ ~ +60℃，It can be used in very poor conditions . 
• It contains connection box and installation with conventional screw. 
• PC lamp housing with the sound impact resistance, thermal stability and luster effect. A variety of installation is aviation. 
• Sealing material: waterproof sealing ring. 
• Combustibility rating：UL94-V0. 
• Flashing mode or stead burning is available and it do not need controller. 
• LED is aviation special red color，Typical LED lifetime is more than 100，000 hours. 
• With high power LED，and LED parallel connect, with low voltage constant current power supply, any LED fault will not affect others, with high stable and reliable of the lights. 
Installation and Operation
• Secure the light on a smooth surface which has enough strength, if there is no mounting surface, we can customize special mounting bracket as request. 
• When installation, please stay away the nearby light source, at the same time, ensure the photocell do not cover by the near object. 
• Make sure the power supply can match the rated power of light before connecting.  
• Insert the power cable from the gland box and then connect them to the corresponding terminals inside the lamp body. 
• Check whether the power cables are connected correctly before power on. 
Notice
• Check whether the power cables are connected correctly before power on 
• Please do not open the control box by yourself