Cortina GL-E8640T Epon OLT 40 PON PORTS 10G fiberhome

GL-E8640T is a miniaturization and modularization GEPON OLT, broadband fiber access system platform, developed by GL. It is fully compliant to IEEE802.3-2005 and Chinese technical requirements of Ethernet Passive Optical Network (EPON).

1、Special Features

• With Twin-star bus 10Gigabit core switch backplane, support non-blocking wire-speed switch, support 1.25G EPON optical fiber access.
• 8U height, adopt full front-wiring, high capacity, maximum EPON optical fiber interfaces reach up to 40.
• Full-load provide double main control modules, double uplink modules, double power supply modules and 10 service interface modules.
• High reliability, support AC and DC dual power supply, with active/standby switch protection function of power supply module, core switch module and uplink interface module.
• Support flexible controllable multi-cast, IGMP Proxy/Snooping and etc.
• Support strong VLAN extension functions, including VLAN Stacking/Trunk/Translation, etc.
• Support ONU auto-recognizing, auto-detecting, pre-configuration management, support hybrid MAC and SN authenticate approval function.
• Support flexible DBA, uplink/downlink service rate-limited, precision up to 0.2% (Standard requirement<5%)
• Adopt multi LLID and IEEE802.1p technologies, provide multi protection QoS service.

• No	Item	Full load Qty	Description
  1	Equipment frame	1	OLT equipment frame, including 10Gigabit core switch backplane
  2	Main control module (SWA)	2	Hot-swappable module, integrate 1 FE out of band management port, 1 deb ing serial port, 10Gigabit class non-blocking switch)
  3	EPON interface module (EP4)	10	Hot-swappable 4 EPON interfaces modules, compliant with IEEE802.3-2005 EPON technical standard, support 20km transmission distance (Standard configuration without optical module)
  4	Uplink interface module(HUP)	2	Hot-swappable 4 GE interfaces module, SFP slot, support 4GE+10GE XFP(Standard configuration without optical module)
  5	Fans module(FAN16)	3	Hot-swappable fans module
  6	Power module(PWR)	2	Hot-swappable power supply module supports 220VAC/48VDC (With UPS charger). Builds dual power redundant hot backup with dual power supply

•  

  3、Hardware features

  Equipment parameters	Dimension	486mm(W)*103mm(H)*384mm(D)
  	Net weight	15Kg
  	Power consumption	≤400W
  	Operating condition	Temperature:0 ~ +55℃, humidity:10 ~ 90% (non-condensed)
  	Storing condition	Temperature:-25 ~ +70℃, humidity:10 ~ 90% (non-condensed)
  Power supply	DC	36 ~ 75 VDC
  	AC	176 ~ 264 VAC
  Equipment interface	Uplink Ethernet interface	1*10GE(XFP connector), 4*GE interfaces (GE or SFP connectors)
  	EPON interface	40*EPON SFP interfaces
  	Console deb ing interface	1 interface, compliant with RS232 technical standard
  	Out-of-band management interface	1 interface, compliant with 100Base-TX technical standard
  	Monitor and alarm interface	1 interface, compliant with RS485 technical standard (Support sub-node monitor )

   

  4、Advanced features

  Switch function	10Gigabit switch backplane (Switch capability reach up to 272Gbps), non-blocking wire-speed switch ability 16K MAC address table, support 2K multicast table, support 4K VLAN (802.1Q) Up to 1*10GE, 4* uplink GE aggregation (IEEE 802.ad), support maximum 5 aggregation groups, support port mirroring based on output interface
  VLAN	Support IEEE 802.1Q VLAN, support 4K concurrent VLAN Strong VLAN extension functions, support VLAN Stacking/Trunk/Translation and flexible QinQ, etc
  RSTP	Support STP, RSTP
  IGMP	Support IGMPv1/v2 protocol, support IGMP Snooping/Proxy, support controllable multicast
  QoS and ACL	Support CAR(Committed Access Rate), flow rate limit granularity is 64Kbps, Support priority level remarking based on port ID, MAC address, VLAN, 802.1p, DiffServ and/or IP ToS priority Support flexible queue scheduling algorithm, support port-based and queue-based configuration simultaneously, support three queue dispatch strategies, such as SP(Strict Priority),WRR(Weighted Round Robin) and hybrid mode(SP+WRR) Provide illegal frame filter and packet filter that based on sources MAC(Media Access Control)address, sources IP address, destination IP address, port, etc. Support QoS Profile management, allow user draw up QoS service plan
  Broadcast storm suppression	Support broadcast, multicast and DLF broadcast storm suppression, suppression based on setting PPS
  Flow control	Support IEEE 802.3x flow control in Full duplex mode, support backpressure flow control in half duplex mode
  Encryption and security	Support LLID MAC address bundling, control the registration of ONU. Prevent illegal ONU deceive Support ONU inter-separation control within same EPON network Support encrypted start to control configuration
  Link test	Support EPON network link diagnosis by Ping and Link test
  Configuration recovery	Support ONU off line configuration, auto-configuration when registered
  Management	FTP, Telnet, Console Support in/out-of-band management, support SNMPv1/v2, support IEEE802.3ah OAM
  Management function	Support equipment configuration management, performance management, fault management, sources management, safety management and etc. Support ONU remote management, remote mass configuration download, software remote auto-update Support ONU offline configuration, auto-configuration when registered Support ONU line diagnosis and distance measuring
  Redundant backup	Support AC/DC dual power protection