Emergency Kit for LED Tube

 

1.Model: EVL-12S18A

 

2.Instruction manual

Product name: Emergency lighting module for LED tube

 

3.Product highlights

1. According to EN60598; EN 55015; CE;

2. Deep discharge protection

3. Operation time (discharge):1hours(Customized within1hrs)  

 

4.Specification

Voltage: AC 90-280 V 50-60Hz

Self consume power: <5W

Battery charging: 24hours

Discharge current: 1.5A

Suitable light source: LED tube

Battery specification: LI-POK 11V2000MAh

Environment temperature: -10…+55℃

Highest surface temperature: 70℃

LED charge monitoring

Battery protection device equipped

Test switch: switch between emergency and normal lighting function, should have normally open switch

Applied LED tube range:16W

 

APPLICATION GUIDE

7.1.Install the unit according to wiring diagram, any improper wiring may lead to permanent damage to the unit;

7.2.Normal AC mains supply, the inverter allows the battery pack charging,trickle charge to maintain battery performance.Sudden interruption of the mains AC,then the inverter converts DC battery powered to ensure that lighting and security;

7.3.Inverter with multiple protection functions:charge protection,discharge protection, short circuit protection;

7.4.To ensure maximum performance of the built-in battery, please fully charge the unit for 24hours after first installation;To extend battery life,please make sure charge the battery at least one time every three months;

7.5.Don’t install top of the high temperature objects.Please ensure that the operating ambient temperature is below 50ºC, and maximum case temperature (tc) not exceeding 70ºC;

7.6.Do not operate this unit beyond the operating supply range;

7.7. In normal use, the battery can be done 500 charge/discharge cycles

7.8. Inverter life is more than 4 years

7.9.If experience any problem during use,please contact with Even Technology for help.