Quick operation guide

1. Safety Warnings

• Do not throw the product of intense wrestling, impact, etc.Resulting product cracking, deformity, corrosion and other anomalies,Please stop using it immediately and to contact the seller or manufacturer.
• Do not place the product in a fire, water, high temperature (> 55 ℃) and low temperature (<0 ℃) environment,Do not give children to play or touch accessories.
• Do not disassemble, modify products, to avoid damage to the product protection, resulting in product use exception.
• Use a dry, soft cloth to clean the surface, not allow chemicals, soap or detergent.
• As a result of a breach of the warning consumers without proper personal or property damage caused by the use, will bear all the consequences, the company will not bear any legal responsibility.

1. Know your IPC

General appearance

• Infrared Light
• 720P HD Camera
• Built-in Speaker
• Network Status LED（Blue lights means online，Blue lights flashing means Offline，Red lights flashing means Rmoning）
• MIC
• WIFI Antenna
• Network interface
• TF card interface
• Amplifier Interface
• Power supply interface（5V2A）
• REST Key
• Bracket Interface

3.Product Configuration

 

 

• Host
• WIFI Antenna
• 5V2A Power Adapter
• Infrared remote control(KUBAO)
• Bracket

 

 

 

 

4.Product Specifications

 

 

• Dimensions ：125*100*110mm   
• Weight：350g
• Working Temperature：0℃~ 55℃
• Pixels：720P HD
• Power Adapter：5V=2A

 5.App Download

 

 

IOS clients can search and download 2CU from Apple APP StoreAndriod clients can search and download it from our website:www.2cu.co.And you can scan QR Code to download and install.

    

For Andriod                          For IOS

1. Initial Use

 

 

(1)Start Host:Use the power adpter，blue lights，and start flashing，that means the host start working；

(2)Network connecting（When first using the following method，after that you can change wifi to Wired Network ）：

a、Wired connection：The network cable access network interface，Until the indicator light changes from flashing to steady，IPC start connecting.

b、Add IPC to  your  phone APP：

Open 2CU ,（Make sure the phone and the host use the same network），appTip discovery of new equipment，Click it ，When prompted, enter the device name and create a device access password（Keep in mind that your device password，This password will be used to  remote access and use setting，Once forgotten, you can reset button to restore factory defaults via REST）.Click Save to finish adding.As shown in Figure:

  

2.Start using your IPC

 

 

After connecting,You can use functions and settings on your phone by the app “2CU”.

 

3．Enable alarm system

(1) Enable alarm system needs to ensure the device is armed. Otherwise not trigger alarm. Remote alarm push the need to ensure the device is connected to the Internet, 3C card inserted.

(2) Arming and Disarm method:

Ⅰ. Host key operation: On the keyboard, press "#" key for 3 seconds, warning light is flashing to steady, means it is in the armed state. press "#" key for 3 seconds again, Lights off, and it is in the disarm state.

Ⅱ. APP Remote Control： Adding devices to the app contacts. Click on a contact name->setting->remote setting.

Ⅲ. Remote Equipment Control,as this photo:

• Arming control button；②Disarm control button；③Emergency alarm control button，In the non-state armed，needn’t external alarm or motion detection trigger device，it will alarm immediately. This function is limited to use remote equipment control④No function keys, do not use.

(3)Alarm menu setting, 【Main menu】>【Alarm】

①Sending email setting:  When alarm happen,it will capture images and sent to your mailbox.

②Binding ID Setting: Add your APP ID number , When an alarm is triggered the NPC will be directly pushed to your phone. Make sure the NPC ID has been added to your contacts of APP. NPC can bind three APP ID, Please press "#" to enter the next ID.

③Motion Detection Setting: In the armed state, Once a moving object through the camera range, will trigger an alarm. Can be used with external alarm devices (door magnetic, infrared, etc.)at the same time.

④Buzzer Setting: Host will issued warning whistle when an alarm is triggered. You can set the length of 1-3 minutes.

 

 

    Technological innovation to bring you unprecedented convenience,But technology can not replace your love,We only provide care more convenient way,please spend more time to care your family.

    Thank you for your patience to read,I wish you a happy use！