Safety Valve Calibration Table
Reference Standards:
TSGZF001-2006, GB-T12242-2005, GB-T12241-2005, GB-T12243-2005
Range of application: Applicable for the set-pressure, setback pressure and sealing tests of direst loaded and pilot-operated safety valves.
Technical Parameters:
Maximum drift diameter: DN400mm
Maximum test pressure: 60Mpa
Pressure test precision: Pressure gauge of 0.4 grades (Users can choose a more precise one. )
Test medium: Nitrogen, compressed air or clean water (Gas liquid dual-capable one can be designed. )
Functions and Characteristics:
The equipment has advanced design principle. It uses pneumo-hydraulic booster pump as its clamping pressure source and air driven gas booster pump as its test pressure source. A gas cylinder is equipped, which enables the test to be conducted continuously.
The test pressure is adjustable and the process of pressurization is stable.
Clamping pressure source and test pressure source can use imported booster pumps from America or Germany, which have a wide range of output pressure.
All the manual high pressure valves, pipe fittings and connectors are imported ones, which guarantee their pressure levels, safety and reliability. Most gas and liquid media are available.
MAQ-100 /15N Type Constant Pressure Calibration Set for Safety Valve
Functions and Characteristics:
Maximum drift diameter: DN100mm
Maximum test pressure: 15Mpa
Pneumatic clamping device is adopted. Clamping force is adjustable. The equipped pressure gauge displays the corresponding clamping force and provides a comparison table between the pressure and the clamping force, which facilitates operators to choose appropriate lamping force according to the safety valve calibration pressure and the drift diameter.
All the valves, pipe fittings and connectors are made of stainless steel.
The test is operated manually and operators record the data.
Safety Valve Calibration Table,the power is air amplifier or air driven gas booster,used in oil field
The system includes a test and calibration table with a clamping device which is for safety valves of DN15-DN100.
Various test tools are equipped to meet the needs of customers on different kinds of safety valves.
Technical parameters |
SBT400 |
Maximum burst pressure |
400Mpa |
Number of the test pieces |
1 pressure port |
Pressure source |
SHINEEAST hydraulic oil pump |
Power source |
Hydraulic pump motor |
Test medium |
Hydraulic oil ISO VG46 or ISO VG32 |
Control unit |
IPC and Manual |
Test Medium |
Water or Hydraulic oil |
Dimensions of the test chamber |
1850 X1200X840mm |
|