KG66 dyeing machine computer
The characteristics of
1. The digital high brightness LED display
2. The temperature correction software functions, convenient temperature correction
3. The PID adaptive control method
4. Low power consumption and low fever
5. Suitable for all switch control of high temperature and room temperature sample vats

The main technical performance:
1, the input and output interface
A temperature measurement circuit of input
5 way switch output interface
Three: road is used to control the heater, controlled cooling valve 1 road, call 1 road, output contact capacity: AC 240 v / 3 a

2, temperature control performance
Temperature measuring element: PT100 platinum thermal resistance
Temperature measurement range: 000.0 ℃ to 153.0 ℃
Temperature control range: 030.0 ℃ to 150.0 ℃
Temperature control precision: heat preservation period of steady-state deviation + 1.2 ℃ or less
Temperature control: optimization of adaptive control
3, programmable functions
Programmable technology: (0 ~ 9), a total of 10.
Programmable steps: each process programmable (0 ~ 9), a total of 10 steps.

4 and parameter setting of temperature control range
Set the target temperature range: 030.0 ~ 150.0 ℃ (c)
Heating rate set range: 0.2 ~ 9.9 ℃ / min (degree/min)
Heat preservation time setting range: 00 ~ 99 min (points)
5, programming, checking
With "delta" and "del" button to check each step sequence set is the data and the process parameters

6, protection function
(1) computer after put into operation, if lose power, into the process parameters and working state of instant will not disappear, after power on the step to restore the data operation.
(2) when the measured temperature higher than 150 ℃, the call and stop running.
(3) PT100 temperature measuring probe, when open the call.
(4) insulation than target temperature 2.4 ℃, the cooling valve to open
7, power supply scope of work
50/60 hz AC (180 ~ 240) V engine power 6 w or less consumption

8, appearance size
Wide * long high (96) (96) (100) mm3
Hole size: 92 x 92 was
9, environmental working conditions
Working temperature of 50 ℃ or less relative humidity of 90% or less

If the listed specification has any changes,our company has right to modify without notification at any time.