TECHNICAL SPECIFICATION:

Chassis:

Produced by gas welding machines from high resistance steel as *I* section in resistance calculation excessive loading has been considered with robotic welding machine.

Axles :

Produced as 3*14 tons capacity ,automatic braje adjustment lever and compliance with european standards.

Air-Suspension:

Consist of height adjusting system with lowering and raising parobolik Z spring and shock absorber elements limining the accesive axle movementaxle movement.

Front Axle Lift :

Controlled from axle lifting system into the cabin.

Brake System:

Designed according into the european standards Wabco products are used on equipped with automatic brake adjustment brake chambers (30 cylinder) Brake linings (420x200 mm) axle brakes EBS system.There are two pieces of replecable protective brake sockets.

Support Leg:

Each has 24 tons working capacity and double speed mechhanical support leg.

Tyre :

6+1 tubeless tyre in 385/65 R 22,5 size

Flor Covering :

In the shape of 3*4 mm diamond type wooden gril.

King Pin:

Produced with wrought iron (42 cr Mo4)Thats high resistance to tension and breaking off compliance with 2’’ SAE/DIN norms and provides easy replacement posibility with screw connections

Electric System:

24 Volt electric system in accordance to EU regulations.

Side Walls and Floor:

Floor is checkered steel plate or hardened wood. Side walls aluminum or steel walls. Optionally can be design for pipe trasnport.

Paint:

Trailer clean before painting and repair with paste for smooth face. Then prime paint and double last paint regarding customer reguest in Paint Oven.

Standart accosseries:

1-Bumper
2-Single basket spare Wheel carrier producted with aliminium panel
3-1 piece of fire extungisher cabinet
4-1 piece of tool cabinet
5-Stanless steel water tank
6-1 piece wege
7-Bike fences
8-Mudgard
9-4 pieces Ro-Ro rings

Optional Features:

1-Disk brake
2-Fishbone design without floor covering
3-Rising bumper
4-Different mudgard for each tyre
5-European axle (BPW-SAF9)