Vamo One uses 0.5 sub-ohm atomizer for creating huge cloud production. The lithium battery is 1000mah.

How to use:
Power on and off, five clicks in 2 seconds, the button light will flash 3 times to indicate. Vamo One is ready for use. In the same way, Vamo ONE will be powered off after 5 clicks.

Vaping:

Press the button and inhale or vaping. When the button is held down, the button light will be on. When battery voltage is lower than 3.5V, the light is orange, when the battery voltage is over 3.5V, the light is in blue.

Charging: Simply charge Vamo ONE by connecting it with a computer or wall adapter via USB cable. When charging, the light is red, when full-charged, is green.

E-juice Filling:
Separate the atomizer from the battery and inject the liquid directly into the cambered slot.

Atomizer Coil Replacement:
The atomizer coil is located at the base, just unscrew it and replace and clean.(Note: Please do not wash the atomizer coil with water. Simply scrub it with alcohol cotton or clean with dry cloth.)

Adjustment of Air Inflow:
Adjusting the ring on the atomizer base clockwise to decrease the air inflow, and counterclockwise to enlarge the air inflow.

Functions:
Short circuit protection:
1.When the battery strength is low, Vamo ONE will stop working. Please charge the battery to reactivate.

2.When the short circuit occurs, the button light flashes for 3 times.Atomizer protection: Vamo ONE has a 10 seconds run time protection. The light will flash 10 times if the button is pressed for more than 10 seconds.

Low voltage protection:

When the battery voltage is less than 3.3V, the button light flashes for 15 times and the device stop working.

Cautions:
1. You need to choose suitable battery which matches Vamo ONE sub coil.
2.You'd better keep Vamo ONE power-off when taking along without use.
3.Try not to press the button if Vamo ONE is not in use.
4.Do NOT attempt to repair it on your own as it may lead to further damage to the item or personal injury.