SAE J525 DOM Tubing Sizes

Model:	SAE J525
Brand:	TORICH
Origin:	Made In China
Category:	Metallurgy , Mining & Energy / Metallurgy & Mining / Piping Tubing
Label:	DOM steel tubes , cylinder steel tubes , seamless steel tubes
Price:	US $1200 / ton
Min. Order:	5 ton

Product Description

SAE J525 Welded Cold Draw Low Carbon Steel Tubing annealed for bending and flaring

Size range: O.D.:30-350mm W.T.:1-15mm L: 12000mm or Cut to Short Pieces as specified length

Applications: for Bending and Flaring, Auto Parts

Table 1- TUBING OUTSIDE DIAMATER TOLERANCE
Nominal Tubing OD mm	Tolerance OD ±mm	Tolerance ID ±mm
Up to 9.50	0.05	0.05
Over 9.50 to 15.88 inclusive	0.06	0.06
Over 15.88 to 50.80 inclusive	0.08	0.08
Over 50.8 to 63.50 inclusive	0.10	0.10
Over 63.50 to 76.20 inclusive	0.13	0.13
Over 76.20 to 100.00 inclusive	0.15	0.15
WT tolerance shall be not more than 10%

Table 2- TUBING WALL THICKNESS TOLERANCE
Nominal Wall Thickness	Nominal OD Through 22mm ±mm	Nominal OD 22-48mm ±mm	Nominal OD 48-100mm ±mm
0.89	0.05/0.05	0.05/0.05	0.05/0.05
1.00	0.05/0.05	0.05/0.08	0.05/0.08
1.25	0.05/0.05	0.05/0.08	0.05/0.08

1.50	0.05/0.05	0.05/0.08	0.05/0.08
1.65	0.05/0.05	0.05/0.08	0.05/0.08
2.00	0.05/0.05	0.05/0.08	0.05/0.08
2.11	0.05/0.05	0.05/0.08	0.05/0.08

2.410	0.05/0.05	0.05/0.08	0.08/0.08
2.500	0.05/0.08	0.05/0.10	0.08/0.08
2.770	0.05/0.08	0.05/0.10	0.08/0.08
3.000	0.05/0.08	0.05/0.10	0.08/0.08
3.050	0.05/0.08	0.05/0.10	0.08/0.08

3.40	-	0.05/0.10	0.08/0.08
3.75	-	0.05/0.10	0.08/0.08
4.00	-	0.08/0.10	0.08/0.10
4.19	-	0.08/0.10	0.08/0.10
4.57	-	0.10/0.10	0.08/0.13
5.00	-	0.10/0.13	0.10/0.13

Table 2- CHEMICAL REQUIREMENTS
Element				%
Carbon				0.06-0.18
Manganese				0.30 to 0.60
Phosphpris				0.040 max
Sulfur				0.050 max

Table 3- MECHANICAL PROPERTIES
Properties				Value
Yield Strength,min				170 Mpa
Ultimate Strenth,min				310 Mpa
Elongation in 50mm, min				35%
Hardness ( Rockwell B),max				65.00

Payment Terms:	T/T L/C or Upon negotiation