Mini conventional 2zones fire alarm control panel

Product Features

2 conventional input zones

1 notification appliance circuits(NAC) with bult-in synchronization for ANSI3.41 and Gentex.

The panel comes with a 2 amp power supply

Dedicated alarm and trouble relays

1 RS485 can be able to connect the other panel

Housed in a 205mm Wx258mm Hx81mm D metal enclosure

Enclosure supports two 12V,4Ah backup batteries

 

Electrical specifications

Primary AC: 120VAC 50/60Hz power supply rating,240VAC 50/60Hz

Power supply rating: 2amps@24VDC

Maximum battery charing current: 0.98amps@26VDC

Initiating Device circuits 2 zones: Alarm zone 2

Normal initiating operating voltage: 23VDC,Maximum 26VDC,regulated

Normal quiescent current(normal status): <50mA

Alarm current(not include the others): <150mA

short circuit initiating current ( perzone): 35mA maximum

Maximum initiating resistance ( per zone): 10 ohms

initiating End-of-line Resistor: 4K7 ohms,1/2W 5%

Standby Detector Current(per zone): 4mA maximum

Maximum Detector Count(per zone): 30detectors

Initiating Cabling Type: 18AWG Twisted Shielded pair(14-18AWG)

Detector base impedance: 430ohms

Notification Appliance Circuits: 1NACs,special application

Maximum NAC current Rating: 1Amp maximum per circuit

NAC operating voltage: 26VDC Nominal,30VDC Maximum

NAC End-of-line resistor: 1N4007 Diode

FAULT Relay rating: 2A&30VAC, resistive

Alarm(Auxiliary)Relay rating: 2A&30VAC,resistive

CP1002M(Master alarm panel): with power supply and digital display

CP1002S(Slave alarm panel): with power supply,without digital display.