Model: | - |
---|---|
Brand: | tri band signal repeater |
Origin: | Made In China |
Category: | Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment |
Label: | mobile phone signal , tri-band mobile phon , umts signal repeater |
Price: |
US $330
/ pc
|
Min. Order: | 1 pc |
· 2G/3G/4G cellphone signal booster ,tri band signal repeater ,tri band signal amplfier
900 1800 2100MHz signal repeater GSM & DCS & 3G wireless signal repeater
Are you are faced problem with your mobile network?
We are here to help provide you with a wide range of repeater that will boost your mobile phone signal , And make you contact with others smoothly.
Key specifications of our tri-band repeater for 900/1800/2100MHz
Items |
Uplink |
Downlink |
|
FrequencyRange |
GSM900+DCS+WCDMA |
890 ~ 915 MHz |
935 ~ 960 MHz |
1710 ~ 1785 MHz |
1805 ~ 1880 MHz |
||
1920 ~ 1980 MHz |
2110 ~ 2170 MHz |
||
Max.Gain |
70 ~ 75 dB |
65 ~ 75dB |
|
Manual Gain Control |
31dB in step of 1dB |
||
Automatic Gain Control |
20dB |
||
Bandwidth |
Wide Band |
||
Ripple in Band |
CDMA/GSM 8dB DCS10dB WCDMA 6dB |
||
Max. Input Power Without Damage |
0 dBm |
||
Output Power |
UL20dBm/DL23 dBm |
10 ~ 24 dBm |
|
Intermodulation Products |
9KHz~1GHz |
-36 dBm |
-36 dBm@Po20dBm |
1GHz~12.75GHz |
-30 dBm |
-30 dBm@Po20dBm |
|
Spurious Emission |
9KHz~1GHz |
-36 dBm |
-36 dBm |
1GHz~12.75GHz |
-30 dBm |
-30 dBm |
|
Spurious Emission Mask( WCDMA ) |
Complies with 3GPP TS 25.106 |
||
Modulation Accuracy( WCDMA ) |
Complies with 3GPP TS 25.106 |
||
Peak Code Domain Error( WCDMA ) |
Complies with 3GPP TS 25.106 |
||
ACRR( WCDMA ) |
30dB ±5MHz±10MHz |
||
Noise Figure @ max. gain |
8 dB(Typical) |
||
Return loss |
- 8 dB |
||
Time Delay |
0.5 μs |
||
MTBF |
50000 hours |
||
Power Supply |
AC 90~265V, 50/ 60Hz DC 12V 10A |
||
Power Consumption |
55W |
||
Impedance |
50 ohm |
||
Input Signal Level |
Normal |
At the edge of green and orange -50dBm or more |
|
Low |
Green |
||
High |
1-5dB range Orange 20dB Red |
The full set may include (the accessories is up to your choice)
ST repeater main unit
◆Outdoor antenna
◆Indoor antenna
◆Feeder line
◆Power Splitter (when there are more than 2 indoor antennas)
◆Connector(N connector, F connector, N to F connector etc)
Installation guide:
Installation Steps
1 Use of mobile phones at the top of building or around the building to check out the direction of the strongest signal location.
2 Select the appropriate location, and put the outdoor antenna fix to the wall or bracket.
3 Select the appropriate location of the indoor locations (this location could be best that close to power and a well-ventilated place, sun-proof, rain-proof) Install the Indoor Repeater, and fix on wall or bracket.
4 Put the outdoor antenna to the "OUT DOOR" connector and tightens it. Thus complete the outdoor antenna and Repeater's connection.
5 After setting the suitable location of the indoor antenna and the installation place, then fixing the antenna.
6 The indoor antenna and Repeater wiring, the indoor antenna connect one end of the interface and on the other end connect Repeater's "IN DOOR" port.
Shenzhen Sai Tong Tian Electronic Technology Company | |
---|---|
Country/Region: | Guang Dong - China |
Business Nature: | Manufacturer |
Phone: | 18575157221 |
Contact: | kerry (sale) |
Last Online: | 14 Apr, 2015 |