SALIENT FEATURES

• PID Microprocessor Control.
• Uniform Surface Temperature.
• Thick Alloy Block.
• I.R. Heater.
• Top Surface Harden & Grinded
• SUITABLE FOR RESIN TEST

CONSTRUCTION
The heating block is made out of Thick Alloy block duly machined harden & grinded/polish and fitted with Pt-100 sensor.
The heating block is fitted with specially designed ceramic/infrared or suitable heater.

The Hot Plate will be supported by 4 heavy angle. The control system will be provided separately consisting of PID Controller, Mains ON/OFF switch, SSR & Electronic circuit etc. 

TECHNICAL SPECIFICATION
SIZE OF HOT PLATE             : 150 x 150mm approx.
THICKNESS OF TOP PLATE  : 30/35mm approx.
TEMPERATURE RANGE        : R.T.+ 15 Deg. C above ambient to 250 Deg. C surface Temp.
RESOLUTION                        : 0.1 Deg. C.
CONTROL ACCURACY          : +/- 3 Deg. C or better.
SURFACE TEMPERATURE UNIFORMITY : Within +/- 1% FSD or +/- 3 Deg. C or better within 120mm x 120mm surface area from center.
OVERALL SIZE                     : As required.