Function

1. Adjust the position switch to change the output voltage, used as an adapter suitable for most of laptops and notebooks in the market.
2. Used as a charger, to charge the laptop battery directly without having to fix the battery to the laptop or notebook,suitable for over 95% of laptop batteries in the market with different connecting wires.
3. Gain the information from battery protective plate; achieve to adjust the output voltage and output current automatically.
4. Intelligent protection against over current, over voltage, over charge, over heat, short circuit and so on.
5. With the repair zero voltage battery function.
6. Charge your USB peripherals with the USB port, such as Mobile phones, MP3/MP4 players, Digital cameras, etc.
7. 7. Simplify charging process, save your time and keep your laptop in good condition, especially if you own two batteries or more.

Basic parameters

Model: RFNC9

Color: black

Size: 155*62*36mm

Net weight: 280g

Input voltage: AC 100-240V

Output voltage: 6-24V

Output current: 4.5A max

Max output power: 90W

Standby power consumption :< 1.2W

USB output voltage: 5V

USB output current: ≤1.5A

Work temperature: 0℃～40℃/20%～90% RH(Non Condensing)

Storage Temperature; -20℃～65℃/10%～95% RH(Non Condensing)

Safety Standard: CE standard (UL, CB, GS, T-Mark etc. can be made as customers’ requirements)

Warranty: one year

Charging instruction

1. LED1 is on after power on, then goes into standby mode.

2. Enter the battery charging mode, and start to charge when connecting with the battery in right way.

LED1, LED2, LED3, LED4, LED5, LED6, LED7 indicate the charge status as following:

Charging LED Status	Capacity Percentage
All the seven LEDs blink circularly	<15%
LED1 is on. The other six LEDs blink circularly	<29%
LED1 and LED2 are on. The other five LEDs blink circularly	<43%
LED1, LED2 and LED3 are on. The other four LEDs blink circularly	<57%
LED1, LED2, LED3 and LED4are on. The other three LEDs blink circularly	<71%
LED1, LED2, LED3, LED4, LED5 are on. LED6 and LED7 blink circularly	<85%
LED1, LED2, LED3, LED4, LED5, LED6 are on. LED7 blink	<100%
All the Seven LEDs are on	=100%

3. Abnormal charging status: LED1, LED2, LED3, LED4 blink simultaneously in frequency 2 HZ.

4. Return to stand-by mode when disboard the battery, LED1 is on.

5. Enter the adapter working mode after connecting with the adapter wire, Adjust the switch to change the output voltage before connecting the laptops/notebooks. (After connect with the laptops/notebooks, the position switch is invalid.)

LEDs indicate the voltage as following:

LED status	LED1 on	LED2 on	LED3 on	LED4 on	LED5 on	LED6 on	LED7 on
Output voltage	15V	16V	18V	19V	20V	22V	24V

6. Output voltage ≤20V, maximum current is 4.5A.

  Output voltage =22V, maximum current is 4A.

  Output voltage =24V, maximum current is 3.5A.

7. USB output voltage 5V, maximum current 1.5A, can charge mobile phones, MP3, MP4, digital camera, etc. digital USB peripherals by different connectors.