CNM YH30 Embossing Machine Onion Jack For Post Tensioning:
YH30 embossing machine(bulb jack) for pc strand
1. Model: YH30
2. Usage: To bend pc strands make it become flower type(dead end anhcor) for fixing.
3. Matched oil pump: it is work with our YBZ2X2-50A(50Mpa) or YBZ1.5x2-63(53Mpa) electric oil pump.
4. Suitable PC Strands Diameter: 15.24mm, 12.7mm.
5. YH30 knurling machine is the special extruding equipment of making the fixed-end anchorage, mainly used for extruding the fixed-end of Prestressing strands into pear-shaped scattering shape.
6. After replaced the wedge, it can be used for the other specification of steel strands.
7. YH30 type knurling machine is small in size, light, and easy to operate.
8. Our Advantages: We supply full complete set anchor system and equipment for construction, please see following:
A: Mono strand anchor system: 5mm,7mm, 8.0mm, 9.0(9.52mm) anchors for steel wire
B: Multi strand anchor system: 9.52mm, 12.7mm, 12.9mm, 15.24mm, 15.7mm, 21.6mm, 22mm anchors for pc strand.
C: Steel rear anchor system: 16mm, 18mm. 22mm, 24mm, 26mm, 28mm, 32mm, ect.
D: Equipemnt: hydraulic jack, oiln pump, metal ducts making machine, pc strand(steel wire) pulling machine, grout pump and mixer, vacuum pump, embosisng machine(bulding jack), extruding machine, ect.
E: Building materials: unbonded pc strand, bonded(bare) pc strand, metal ducts, plastic ducts, steel strip.
YH30 Embossing Machine Technical Data:
| Model |
Rated stressing pressure |
Oil pressure |
Return area of piston |
Extrusion area of piston |
Stroke of extrusion |
Weight |
Overall Dimension |
|
| KN |
Mpa |
m² |
m² |
mm |
kg |
mm |
| YH30 |
30 |
43 |
0.425×10-³ |
0.707×10-³ |
70 |
11 |
560×155×215 |
Contact with me to know more:
We are PT Manufacturer from China, our full products range for post tensioning and pre-strssing construction:
1. Materials: pc strand, YJM anchor system(monostrand anchor, multistrands anchor), ducts(metal ducts, HDPE plastic ducts)
2. Equipment: Hydraulic Jack(QYC mono jack, YDC multi-strand tensioning jack), electric oil pump, YH30 embossing machie(onion jack), GYJ500 extrusion machine, ZG130 ducts making machine, grouting pump and mixer for post tensioning).
Contact Person: Kelvin
Skype: PT Manufacturer
Email Address: sales@pt-concrete.com
Mobile & Whattsapp(Viber) No.: +8613673713569
