Antiseptic wooden cement board exterior wall cladding     

Introduction:

 

 Artificial wood is a kind of high-tech green environmental protection outdoor building decoration materials.Artificial wood is with cement, ceramsite as main raw materials, through special process simulation It can be in various harsh outdoor environment for a long time of inorganic materials, environmental protection, not deformation, not bad, anti-corrosion mothproof, the advantages of which natural wood cannot match.

 

Technical parameters:

Water absorption	<8%
Breaking Strength	6.5Mpa
Compression  strength	16.0Mpa
Bulk density	13.0g/cm3
Freezing resistance	15.5 Mpa at -20°C
Sticking Strength	1.5Mpa

 

 

Comparison:

 

 

Feature:

  

1.Low absorption,Non-flake,Non-crack,Non-deformation,Stable physical properties;

2.High Strength,Abrasion resistance,Nonslip,With high grade solid wood appearance and texture;

3.Anti-UV,Acid & Alkali resistance,Fireproof,Stain resistance,Non-fading;

4.Antibiotic,Mildew-proof,Moth-proof,Corrosion resistance;

5.Energy-saving,Environmental-friendly;

6.Economic,Durable,Easy-to-install,Easy-to-clean,Money-saving,Lower maintenance.

 

Installation:

1).Ensure flooring surface is free from dirt , paint or grease, make sure surface clean, smooth .

2).Apply tile adhesive on the entire back side of the wood. To avoid cement stain on wood surface by using tools, instead of bare hand.

3).Arrange Artificial Wood first on the floor and then install on the wall.Always start with corner component before laying the flat component. Start for one end and work towards the other. Press each wood firmly into the mortar bed in a sliding motion. Ensure that individual wood are placed as closely as possible, creating uniform joints between them.

 

Packing:

Packing Details
Size (mm)	Pcs / Ctn	M2/Ctn	KG/Ctn	Plts/20'GP	M2/20'GP
650×150×20	6	0.6	18	20	648
1000×150×20	6	0.9	25	20	648
1000×200×20	5	1	30	20	630
1000×300×20	4	1.2	30	20	648
2000×200×25	50	20	900	12	240