Model:ELCS-500

Description

It is specially designed for the calibration of load cells. It can calibrate the load cell within ±0.5%.

Advantage

Advantage of Electromechanical Type than Hydraulic calibration system

Load speed can be started from 0.001mm/min up to 250mm/min, while Hydraulic is from 0.1mm/min to 50mm/min

No oil leakage and maintenance free.

Note: this electromechanical calibration system can be customized upon request.

Specifications

Max. Load: 500kN

Deviation of load value: 0.05%

Load repeatability: 0.05%

Sensitive limit: 0.02%

Accuracy: ≤±0.0005%F.S

Stabilization time at any point: ≥30min

Load/unload time: any time set

Load speed: 0.001-250mm/min

Stiffness: 600kN/mm

 

Model:HLCS-10000

Description

It is specially designed for the calibration of load cells. It can calibrate the load cell within ±1%.

Main Structure

1. Load Frame

The load frame is with four columns. The columns are fastened by nuts. Such design is with high stiffness and no gap loading design.

Both tensile and compression are at one space. Max. Compression load is 10,000kN (1000t) and max. tensile load is 5,000kN (500t). The measuring load cell of INTERFACE 1060 is with measuring range 9000kN. And max. calibration space is 1100mm.

Specifications

Sampling rate: 1000Hz (EDC220); 5000Hz(EDC580)

Communication Processor, AMD520, 133MHz

Load resolution ±180,000 steps, two ranges 2mV/V and 4mV/V

RS485 Interface for external keyboard/Display supports only one device

Drive Interface ±10V (16bit) analogue command output OR digital command output

Safety functions like 4DI

Two Option slots for second analogue channel for strain gauge extensometer OR, two encoder channels for extensometer with one or two encoder.

PC communication via USB or Ethernet

Internal socket for serial Sensors (COM 1)

Internal socket for Debug (COM 2)