alan(at)minmetalseast(doc)com

 

E-21 (also known as 601)

Capacity: 12,000MT/year

It is widely used in coatings, primers, insulating paints, anti-corrosion coatings, powder coatings, electrophoretic paints and inside coating of metal decorating food.

 

E-39D

Capacity: 8,000 MT/ Year

The E-39D series is especially for electrician using, because it has high purity and low conductivity characteristics, so it’s dedicated to casting of mutual inductor and dry-type transformers, particularly for the casting of small transformers, mutual inductor, tool molds and other mechanical parts. Prepared with appropriate filler, active plasticizers, pigments and curing agents, this series of epoxy resin could make good products with high mechanical strength, good electrical insulation properties, good dimensional stability, solvent resistance and corrosion resistance etc. In addition to all of the exclusive use above, this series is particularly suitable for prepared with asphalt and room temperature curing agent to make metal surface coating, with good anticorrosive. This coating can be used for primer ship, tank lining coating, pipeline surface coating and the anti-corrosion coating of bridge construction. It’s affordable, with excellent anti-corrosion and widely used.

 

E-44 (also known as 6101)

Capacity: 15,000 MT / Year

E-44 is mainly used for anti-corrosion industries, for example, antiseptic floor and so on. Now, because of the price of E-44 and E-51even close to the same, also their performance are quite similar, in most cases, these two kinds of products can be interoperable.

 

E-51 (also known as 618)

 Capacity: 30,000 MT/ Year

E-51 is referred to as the basic epoxy resin, because of its many features, such as the high epoxy value, low viscosity and light color, thus it’s widely used as adhesive, solvent-free coatings, self-flowing floor material and cast material. The binder made by E-51, with great strength, often referred to as all-purpose adhesive or super glue. The paint prepared by E-51, has bright color, great peel-resistance and easy to operate. The cast material prepared by E-51, has many advantage, such as good processability, great mobility, high mechanical strength, good insulation properties, low shrinkage and low water absorption.

 

EX-23-80A

Capacity: 10,000MT/year

Brominated epoxy resin has been widely used in PBT, PET, ABS, nylon 66 and other engineering plastics, thermoplastic plastics and the flame retardant treatment of PC/ABBS alloy because of its excellent flame retardant property, safety in use and good balance property. Meanwhile, brominated epoxy resin as flame retardant will not cause dioxin problems, so it becomes an important alternative of decabromodiphenyl ether, having a broad application prospect. It also can be used in copper clad laminate.

 

 

 

Data Sheet

Item	Unit	E-51	E-44	E-21	E-39D	EX-23-80A
epoxide equivalent	g/eq	184~194	213-244	450-500	230-270	430-450
hydrolysis of chlorine	Ppm	≤300	/	≤300	≤300	≤300
chloridion	Ppm	≤5	/	/	/	/
sodion	Ppm	≤5	/	/	/	/
softening point	co	/	12-20	64-74	24-32	/
Viscosity(25co)	Cps	11000~15000	/	/	/	1400-2500
chroma	G	≤1	≤1	≤2	≤2	≤5
volatiles	%	≤0.03	≤0.05	/	/	/
solid content	%	/	/	/	/	79-81
bromine content	%	/	/	/	/	18-22
inorganic chlorine	%	/	≤0.0002	/	/	/
organochlorine	%	/	≤0.03	/	/	/