Flyin 1x1 Mechanical Fiber Optic Switch

 

Flyin Optronics’ 1x1 Mechanical Fiber Optic Switch (1x1 Optical Switch) connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal.

All Flyin Optronics’ 1x1 Mechanical Fiber Optic Switch (1x1 Optical Switch) support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance.  The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations.

 

 

Flyin 1x1 Mechanical Fiber Optic Switch

Features

l    Low Insertion Loss

l    Wide Wavelength Range

l    Low Crosstalk

l    High Stability, High Reliability

l    Epoxy-free on Optical Path

l    Latching and Non-latching

 

Flyin 1x1 Mechanical Fiber Optic Switch

Applications

l   Channel Blocking

l    Configurable Add/Drop

l    System Monitoring

l    Instrumentation

 

Flyin 1x1 Mechanical Fiber Optic Switch

Performance Specifications

Parameter		FY-1×1T
Wavelength Range	nm	850	1260~1650
Operating Wavelength	nm	850	1310/1490/1550/1625/1650
Insertion Loss	dB	Typ:0.5  Max:0.8	Typ:0.4  Max:0.6
Return Loss	dB	SM≥50 MM≥30
Crosstalk	dB	SM≥70 MM≥65
PDL	dB	≤0.05
WDL	dB	≤0.25
TDL	dB	≤0.25
Repeatability	dB	≤±0.02
Power Supply	V	3.0  or  5.0
Lifetime	Times	≥107
Switch Time	ms	≤8
Transmission Power	mW	≤500
Operating Temperature	℃	-20~+70
Storage Temperature	℃	-40~+85
Dimension	mm	(L)27×(W)12.6×(H)8.0 (±0.2)

Specification may change without notice.

Above specification are for device without connector.

 

Flyin 1x1 Mechanical Fiber Optic Switch

Pins

Type	Pin	Electric Drive				Status Sensor
1×1		Pin 1	Pin 5	Pin 6	Pin 10	Pin 2-3	Pin 3-4	Pin 7-8	Pin 8-9
Latching	P1-P2	V+	GND	--	--	Open	Close	Close	Open
	Light close	--	--	GND	V+	Close	Open	Open	Close
Non-latching	P1-P2	V+	--	--	GND	Open	Close	Close	Open
	Light close	--	--	--	--	Close	Open	Open	Close

 

Optical Route

Specifications	Voltage	Current	Resistance
5V   latching	4.5~5.5	36~44mA	125Ω
5V   non-latching	4.5~5.5	26~32mA	175Ω
3V   latching	2.7~3.3	54~66mA	50Ω
3V   non-latching	2.7~3.3	39~47mA	70Ω

 

Flyin 1x1 Mechanical Fiber Optic Switch

Ordering Information

X	XX	X	X	X	XX	X	XX
Mode	Wavelength	Voltage Type	Control Model	Fiber Type	Fiber Diameter	Fiber Length	Connector
S=SM M=MM	85=850nm 13=1310nm 14=1490nm 15=1550nm 62=1625nm 65=1650nm 13/15=1310/1550nm X=Others	3=3V 5=5V	L=Latching N=Non- Latching	5=50/125 6=62.5/125 9=9/125 X=Others	25=250um 90=900um 20=2.0mm 30=3.0mm X=Others	1=1m 2=1.5m X=Others	0=None 1=FC/PC 2=FC/APC 3=SC/PC 4=SC/APC 5=ST/PC 6=ST/APC 7=LC/PC 8=LC/APC X=Others