1.specification:

(1).  Duplex Triplex Quadruplex Service ABC Drop Cable.

(2).  CCC,ISO9001,ISO14001, best quality control.

(3).  More than 26 years Proffessional experience, best service.

(4). We are a factory manufacturing ,Best production capability,best Price.

(5). 100% QC inspection before shippment.

2.Introduction :

ABC Cable are overhead power lines using several insulated phase conductors bundled tightly together, usually with a bare neutral conductor. They can improves safety and reliance of electrified wire netting.

3.Standard:

1. B-230 Aluminum Wire, 1350-H19 for Electrical Purposes.

2. B-231 Aluminum Conductors, Concentric-Lay-Stranded.

3. B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR).

4. B-399 Concentric-Lay_Stranded 6201-T81 Aluminum Alloy Conductors.

5. B498 Zinc-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR).

6. Duplex Service Drop cable meets or exceeds all applicable requirements of ANSI/ICEA S-76-474

Duplex Service Drop:

Applications:TO supply 120 volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volt or lower at a  conductor temperature of 75 maximum.

 

Triplex Service Drop: 

Applications: To supply power from the utility`s lines to the consumer`s weatherhead. For service at 600 volts or less(phase to phase ) at a conductor.temperature of 75 maximum for PE insulation or 90 maximum for XLPE insulation .

 

 

Quadruplex Service Drop:

Applications: Used to supply 3 phase power , usually from a pole-mounted transformer to the user`s service head where connection to the service entance cable is made . To be used at voltages of 600 volts or less phase to phase and at conductor temperature not to exceed 75 for PE insulated conductors or 90 or XLPE insulated conductors.

Construction
conductor are concentrically stranded, compressd 1350-H19 aluminum. Insulated with either PE or XLPE. Neutral messengers concentrically stranded 6201, AAC, or ACSR. One conductor is manufacyured with an extrudd ridge for phase identification.