~Material；
Iron filter paper poly rubber etc.

Specification:
These brewing filters is nearly identical to the one above except they have a larger 6" diameter. They're also made from 100% 304 stainless steel and are available in 300 or 400 micron as the stainless mesh on the side and bottom.
To fit a variety of brew kettles, these brew filters are 6" diameter and can be purchased in 10"  11"  14"   16"   and 19" tall. They each have two hangers on the side to attach them to a brewing kettle. One hanger spans all the way across the filter to make a nice handle for removing the filter from the brewing kettle.
We stock all our 6" filters in 300 micron and stock the 6"x14" in 400 micron as well. The 10"  11"   16"  and 19" tall filters can also be ordered in 400 micron but are built only when ordered and may take up to 2 weeks to ship.
Recommended Batch Size:6" Diameter works great with brew kettles up to 12 gallons.
Making larger batch sizes? Check out our larger filter below!
Features
6" x 10" - 282 Cubic Inches
6" x 11" - 311 Cubic Inches
6" x 12" - 339 Cubic Inches
6" x 14" - 395 Cubic Inches
6" x 16" - 452 Cubic Inches
6" x 19" - 537 Cubic Inches
300 or 400 Micron Stainless Steel
Ideal For 10-15 Gallon Kettle
Characteristics:
Spot welded multilayer pack  cylinder  Aluminum ring filter pack and cylinder 
Fool - proof assembling of multi meshes to eliminate human error..
Provided in any combination of meshes.
Highly reliable.
High reliability and durability.
Also available in specific (customer specified) size.
High quality  stainless steel wire mesh used is cleaned by ultrasonic process
acid-resisting, alkali- resisting, heat-resisting and wear-resisting with high quality raw material 

Application
Widely used for filtration and separation in the industry of oil,chemistry,automobile,medicine,food  water treatment etc.
 
 

Our Service:
1. Sample service
    Sample service is available for our company. And sample time is about 5- 7 days.
 2. Customized service
   Customized service is also available for us. We can customize products according to your requirements.
 
3. After-sales service
     Our after-sales service start immediately after signing the contract.    
  1. No matter FOB or CIF the price term is we would try our best to find a lowest freight cost for customers' reference.
     2. The third-party inspection always gets real and true data from us and we will send production photos to customers if there is no inspection.
3. Do our best to help customer arrange the shipment and customs clearance.
     4. Installation, maintenance and repair instructions with full information.
     5.3-15 years warranty depending on different finish and application
     6. Accept Changing or Refunding if the products cannot be installed rightly.
Package:
 It is inside with plastic film and outside wraped with waterproof paper, pallet package or according to customer's requirements.