Description:

Butyl sealant tape is mainly made of butyl rubber.It is environmentally friendly,non-cure,self-adhesive tape.The features are excellent adherence,time resistance,waterproofing and easily adhere onto different surfaces.It also pocess the functions of airproof,shockproof and protection.Its a unique waterproofing sealant material without any solvent,non-shrinkage and non-noxious gas.

Function:

1.Connection of steel board and polycarbonate board,or steel panel and cement surface.

2.Connection of EPDM waterproofing membrane and polyethylene membrane.

3.Waterproof of windows,cement wall surface,ventilating shaft&decoration seal.

4.Sealing of tunnel,dam,retaining wall&cement floor.

5.Sealing and shockproof of refrigerator,reefer containers&cars.

6.Vacuum bag sealing and low voltage resistance.

Advantages
1. excellent self amalgamating and high adhesiveness
2. good compatibility with other material
3. easy to match various shaped surface
4. good water-proof property
5. UV- and ozone-resistant
Application
1. repairing outer sheath of telecom cable
2. for water-proof protection of joint of telecom equipmentantenna and feeder
3. for water-proof protection of joint of aerial insulation conductor

Main Technical Data Sheet:

Note:1)All testing condition temperature is set at 23C besides low/High Temperature testing.

         2)The product can last up to 20 years (using U.V 100 hour as an indication of one year).

Package:
Carton package, we can also package on customers’ requirement.

Use Method: 
1.Choose the reasonable size of butyl tape according to the gap of steel board.
2. Make sure of the surface is clean and dry before application.
3. Stick the double butyl tape on the gap from the beginning to the end of the under steel board. Press the butyl tape stick to the steel board fully.
4. Peel off the release liner, put the above steel board on the butyl and press the above board until the two adhere with each stable.