Product Description

We have been rising to fame rapidly in the past few years in refrigeration dedicates to research and development in Refrigeration &Vacuum technology. 

ALLCOLD is a professional manufacturer, specializing in manufacture and installation of Vacuum Cooler, ice machine(Tube Ice Machine , Flake Ice Machine , Block Ice Machine & Plate Ice Machine) and Cold Storage .

Plate ice machine     are s ested to be designed with containerized model.And installed with automatic ice storage under the bottom of containerized plate ice making plant.

Plate ice machine     meets the HACCP request, and the advanced workmanship and new technology makes high quality tube ice machine , you can always trust on. R ed, heavy-duty design offers years of trouble-free operation .


 

Plate ice machine features:
 

1.By using water and heat fluorine, the whole ice pff process only needs 120 seconds.
 

2.Ice making time adopts time control ,which can be set to adjust the thickness of the ice .
 

3.It conforms to the sanitary security requiments by adopting stainless steel SUS304,aluminum alloy plate chip evaporator.
 

4.Ice dump and water drainage function makes ice more clean and transparent.
 

5.It is convenient to install and maintain because of its modular equipment.

 

 

Technical Specification:

Fresh Water Flake Ice Machine Models&Specifications

Model No.	Production Capacity kg/24hrs	Ice Temperature ℃	Total Power KW	Machine Size mm
APM-1T	1,000	-10	6	1,400x1,200x1,800
APM-3T	3,000	-10	13.5	1,700x1,450x2,000
APM-5T	5,000	-10	30	2,000x1,750x2,200
APM-10T	10,000	-10	45	2,900x2,280x2,600
APM-20T	20,000	-10	85	3,500x3,350x4,200
APM-40T	40,000	-10	150	5,100x4,700x4,200

 

Plate ice machine Advantages:
If the ice storage is full ,the plate ice machine will switch automatically into the water tank control mode to make sure the cold water inside the cold water tank always be at set level .

If ice level inside the ice storage is again going down , the ice plate machine will switch again automatically into the ice making mode. During perids in which the plate ice plant is not producing , the plant automatically controls the water temperature of the cold water using the recrcuation mode.

 

Plate ice introduction : 

Plate ice is a kind of irregular sheet ice with about 40*40 mm-80*80 mm in size ,and 10 mm -15 mm in thickness . 

The thickness can be adjusted according to ice-making time with the maximum gauge being 25 mm .

Plate ice is a kind of thick and transparent ice which has good air permeability and a long shelf life.

Small capacity from 1 ton to 10 tons day offered.

 

Plate ice machine Application:

Plate ice is usually used for ice storage system and is also applied to concrete maxing plants, chemical plants,mines,fresh vegetables , fishing and aquatic insulations.

 

Our Reliable Partner:​

Brand	Country	Parts name
Bitzer	Germany	Compressor
Danfoss	Denmark	Solenoid valve
Danfoss	Denmark	Solenoid valve
Danfoss	Denmark	Low&High Pressure Controller
Oerlikon Leybold Vacuum	USA	Vacuum Pump
Busch	Germany	Vacuum Pump
O&F	Italy	Contactor Relay
Schneider	France	Contactor Relay

 

 

What is our main product ?

Tube Ice Machine , Vacuum Cooler , Flake Ice Machine , Block Ice Machine , 
Plate Ice Machine , MAP Machine , Cold Room

Kinds:

According to the evaporator principle and mode of production, the resulting ice blocks are shaped differently.

Based on the shape of ice, ice makers are divided into tube ice machine, flake ice machine, block ice 

machine, plate ice machine, crash ice machine etc.

Ice machines are required to be high performance , low failure rate and healthy ,and our machines can meet al

inquiries.

 

 

Production Line:

1.Manufacturing Capacity:

We have three production lines at present.

2.Flexible Processing Mode:
Through our unique technology,we have got the most complete product system in the same line 
which help us better meet the marketing's requirements



Certification:

In the development era, to achieve certification is the key to market for enterprises.

After persistent efforts together of all ALLCOLD colleagues ,the full series products including Vacuum Cooler,

Ice machines and Cold Room achieve CE certificates,help ALLCOLD to pave the way to enter into EU market.
 

 

Maintenance:

Good maintenance to equipment play a key role on the equipment performance and longevity . 

Ice machine equipment should be charge by professional staff (through our company training). 

Customer should pay attention to maintenance personal operation and maintenance.

 

Our Services

Why Choose Us ?

1. Professional manufacturer specializing in manufacture and installation of various refrigeration equipments, accommodate different market demands .

2. Effective after-sale service.

3. ALLCOLD believes in " THE PURSUIT OF GREEN COOLING & ENJOY THE FRESHING WORLD"

4. First-rate products and services, make win-win success with clients and cooperative partners .

 
 

Attention:

The price is for reference only, do not do the actual transaction.

Our prices are based on customer's specific requirements, 
so the specific amount should be addressed by further discussion.

 

Welcome to your order.

If have any question , please feel free to contact us .