1.Product Introduction:
The RAM-CL rapid response sticky Hongyuan company newly developed strong cross film self-adhesive waterproofing membrane is composed of a cross laminated high density polyethylene (HDPE) special self-adhesive waterproofing membrane with high performance, cold construction strong film and high quality polymer adhesive rubber asphalt technology with a special compound and into, with dimensional stability, excellent thermal stability, anti ultraviolet performance and bidirectional tear resistant properties.

Strong cross film of the products used for high strength HDPE film using cross laminated superposed formed by thin film technology, this technology made longitudinal elongation identical coil are not deformed, more beautiful and more reliable waterproof effect.
The use of high-quality pressure sensitive reaction of the self-adhesive layer, can be quickly combined with concrete base, and its excellent self-healing property and local self-locking water performance greatly reduce leakage probability.Polymer membrane in compound (segment) and the hydration of cement (silicate network) to form (Interface) interpenetrating network structure, and ultimately the formation of a continuous mechanical bonding, permanently sealed in a cementitious material component.

2.Features:
Excellent physical properties
1) a nail rod tear strength, a nail rod water tightness is more excellent than ordinary mask.
2) with strong cross film production of self-adhesive membrane than ordinary waterproof coiled material on the nails roofing fixing piece of bond stress is stronger, and more high tear strength.Because the nails through the strong cross membrane, vertically and horizontally staggered film to nail a wrapped function and the stress is the same, not tear.While the ordinary film is high longitudinal strength, transverse strength is very low.
3) excellent tensile strength and two-way tear resistance, good weatherability
4) good dimensional stability, not wrinkle, waterproof effect is more reliable.
Construction performance and friendly
1) roll material and structure are firmly bonded to roll any local failure, the water would be limited in scope is very small, not channeling.Even if the individual leakage, leakage and destruction is also the same point, easy maintenance.Self adhesive layer is very characteristic "self-healing function" can make local self healing by puncture point.
2) the construction of the environment adaptability and better.Wet base construction can be, without bottom coating, solvent, fuel, which can not only guarantee the construction period and the environmental pollution is avoided, friendly to the environment of construction.
3) using the apple green mask.Compared with silver white mask can eliminate light pollution.
4) to adapt to climate change hot and cold regions, also can form a good paste without Konggu in irregular part.

3.Technical Specification:
1.2/1.5/2.0mm*1m*20/15/10m(Thickness*Width*Length)

4.Application:
For underground waterproofing roofing, waterproofing and non exposed, open cut subway, tunnel, water pool, water engineering, especially suitable for the no fire use projects;By the binding of cement mortar and the base, the material between the appropriate use of self-adhesive lap.

Welcome to visit us.