Sound and light control LED bulb Instructions
 

Light source: 5730 SMD LED
Low-luminous decay, quick response when activating by sound, no noise, no UV, no strobe light, no pollution
Adapter own-designed LED driver with high-power factory
Materials: Aluminum PCB, ferrous base, PC cover

Voltage:  AC 220V

 Detection Range:  Over 70dBs
Power Frequency:  50/60Hz

Working Temperature:  -20 to 50C
Detection Distance:  4-8m

Power factor:  >0.9
Time-delay:  45-60second

 Installation Height:  1m~4m
Size:  Ø 230 x (H) 90mm
Lifetime:  ≥ 50, 000 hours    
Colors: Cool White & Warm White

 Installation  E27 lamp holder  installation

LED sound and light control lamp sets voice control, light control, delay automatic control technology as a whole, using green and superbright white light LED as the light source. It will not light due to light-operated self-locking function even if there is sound during the stronger light daytime; When the ambient light in the evening after dark, switch to enter standby mode automatically, if it comes to the voices and footsteps sound, lights, immediately turn off the light automatically delay half a minute later; Can avoid dark fall touch injury caused by looking for switch, but also prevent someone corridor lights on, no one off phenomenon.
1, low power consumption, the same lighting effect, LED energy-saving lamps than ordinary energy-saving lamp energy saving more than 80%
2, super long life: Life can grow to more than 50000 hours, up to 10 times than the traditional light source, long life
3, no switch number: LED light source, can work under the frequent switch state, very suitable for voice control lamp
4, the latency time: 30 seconds to 60 seconds
5, using the dedicated IC integrated circuit control


Note: When installation LED bulbs, try to avoid the mine fields, strong magnetic field and high-pressure region.
Ensuring a solid connection correctly in order to avoid short-circuit damage to components and trigger fires.
Installed in a well-ventilated place to ensure appropriate environmental temperature
Using the LED light, please check the local voltage compliance product requirements
To prohibit the live wiring, check to confirm wiring is correct, check the no short-circuit, and then power on.