Double-layed steam heating GMP standard mixing vessel

Application:

It is used for mixing all kinds of liquid products in pharmaceutical, food, chemial and biological fields.

We have different kinds of agitators:

v       Bottom magnetic agitator with propeller impeller, speed from 50-400rpm or 50-800rpm. this kind of agitator is mixing thin viscosity , such as eyedrop, injection, CIP liquid, water, etc...

v       Top mechancial agitator with propeller impeller, speed at fix 71rpm or adjustable 20-200rpm or special requirement. this kind of agitator is mixing syrup, injection, blood, oral liquid, culture media, etc....

v       Emusification homogenizer, speed max 2900rpm for small vessel, 1480rpm for bigger tank. this kind of agitator is mixing most high viscosity , such as suspension, oil, fat emulsification , etc....

Two agitator can be installed in one tank if it needed.

Introduction:

1. The heat preservation material of the vessel is high-temperature resistant and anti-aging polyurethane blister or pearl cotton.

2. The interface adopts internationally general-use ISO rapid installation chuck type product. The internal bladder adopts mirror polishing until Ra ≤0.28um,and the external surface adopts polishing, mirror polishing, sandblasting ,cold rolling original color matte treatment. All of the above conform to GMP standard.

3. The blender adopts sanitary magnetic fully-closed blending device, and the blending rotation speed is optional.

4.The pipe mouth is provided with liquid level meter vent(static pressure type, capacitance type, non-contact type, ultrasonic type or glass tube type),CIP cleaning vent, sight glass, anti-explosion view lamp(integrated sight glass and view lamp),SIP sterilization vent, liquid inlet and outlet, sanitary manhole and etc.

5. The volume varies within the range of 100L-10000L,or design and manufacturing can be according to actual requirements of customers.

Configuration:
1. Quick open manhole
2. 360 degree rotation CIP spraying ball;
3. Sanitary breathing cover
6. Mixer: Paddle; Frame; Impeller;
(Top, bottom side & bottom, etc. places to set the mixer)
7. PU foam Insulation
8. Thermometer , Liquid level meter & ladder (According to customer requirements)
9. Other accessories can make according to customer's special requirements.

Primary technical data sheet