Top entry bag filter for sell

 

Filter bag  Vessels have a high solids holding capacity. These types of bag filtration systems can stand alone for sediment removal or they can be used in combination with other equipment. Sizes range from single-bag units to 7-bag unites. Both carbon steel and stainless steel constructions available.  

 

Filter bag Vessel type

1.Sideline Single Bag Filter vessel

2.Topline Single Bag Filter vessel

3.Multi Bag Filter vessel

 

Filter bag vessel Specification
Material:	SS304 SS316L 904L or lined
Bag Size :	1 2 3
Inlet&outlet :	DIN ANSI Tri clamp NPT
Seal media :	BUNA N EPDM VITON SILCONE PTFE
Maximum Operating Pressure :	150psi
Maximum Operating Temperature	400F
Surface Finish	Bead blasted or polished

 

Bag Filter Housing

The  Top Entry Bag

 

Liquid bag filter effectively removes  dirt,  pipe  scale,  and  other  contaminants  from   process  liquids  such  as  water, chemical 

and  petroleum products. Standard housing material is 316 Stainless Steel or  304 Stainless Steel with Electro-Polishing as an option. The standard configuration of these units assures that they can beeasily incorporated 

into your system. The cover opening direction can be changed to any one of the four Zinc plated steel eye 

bolts for easy bag changeout. The design of the housing allows the use of standard and high efficiency filter 

bags plus  a variety of oring materials with no change in design. This means that whether its hydrocarbons, 

glycol, coolant, inks or water, the SNB Side Entry, Single Bag Filter Housing will fit the need.

 

 

Bag Filter

 

Available in 304 or 316 Stainless Steel for superior corrosion resistance.

150 PSI working pressure, temp. 190°F Max.

Adjustable leg assembly included.

For standard #1 or #2 Bag Sizes.

Cover opening direction can be changed in the field.

Eye bolt closure for easy bag change-out operation.

Stainless perforated basket with bag hold down device included.

EPDM O-Rings standard (other materials available).

Steel or 304 Stainless Steel. The lid assembly is an investment casting of the same material. 

Electo-Plating is an optional feature.

Two body sizes are available to accommodate two different bag sizes; #1 bag size (7x15) and #2 bag size (7x30).

The adjustable leg assembly is  SS 304 or SS316L.

The standard  material of construction for the Perforated Basket will match the housing material. Inlet and Outlet connections are  NPT Threaded or ANSI Flanged.