JTH1853S frame electromagnet is Jiateng technology according to our customers feedback problems, and optimize the 

design, and solve the residual magnetism, strength is small,
The frame solenoid product is small, and power is 

big, long life, easy to install.
Product principle: when the coil is electrified to produce energy, will be in the 

middle of a movable iron core magnetization then generates a forward and backward movement.
Product styles: 

General electromagnet divided into two styles, pull (movable core carrier to be pulled forward movement, the 

spring can be reset); push (in pull based on increasing the top bar and block, block block is used to limit the 

role, carrier in front, the front end of the electromagnet block promote carrier forward movement, with a reset 

spring).
Product size: the main frame size, length of 53mm; wide 44mm; high 40mm.
Working voltage: DC12-220V, can 

be customized according to customer requirements.
The rate of product power consumption: the frequency of the 

product use is generally divided into 50%; 100%; 25%; 10% (power time / power + time) * 100%= power rate,
Such as: 

100% power, refers to the power of a long time; 50% power, the power of a second, power down 1 second;
Temperature 

rise: at reasonable use frequency, temperature rise is less than 65
Working environment temperature: -10 for -180
Product voltage: coil and frame AC1200 (50/60HZ) 1 second, (10mA)
Product life: the product under normal use 

condition, generally all 800000 times above.
Advantages: frame solenoid has the advantages of simple process, easy 

assembly. Defective products are low, the use of long life, high power, small residual magnetic and customers to 

use simple installation, convenient advantages, different products, different design, according to the customer 

to product optimization to the best.