1.Introduction&Property

GFRP Rebar,FRP Rebar,GRP Rebar,glass fiber reinforced polymer rebar,low-weight rebar,all-thread rebar,anti-static rebar. 

2.OurAdvantages 

(1)All-Thread FRP Bolt:The rod is threaded over the whole length, i.e. "All-Thread";

(2)High Corrosion Resistance:The base materials used by the bolt are durable materials, and they are molded through the composite process. The life span is up to 100 years. They can be used as permanent support materials;

(3)High Tensile Strength:The load is approximately double that of a steel bar with the same diameter;

(4)Low Weight:The weight is only 1/4 that of a steel bar with the same diameter. Therefore, the labor intensity is greatly reduced, and the transportation cost is reduced at the same time;

(5)Anti-static:It has no electrical conductivity, and no sparks will be produced when being cut. It is particularly suitable for high gas zones;

(6)Non-flammable: It is non-flammable and has high thermal isolation;

(7)Cuttability:  It avoids damages to cutter heads, and does not delay excavation;

FAQ:
(1) Can you give me a discount price?
 
Answer: It is depending on the volume. The larger the volume is, the more discount you can enjoy.
 
(2) Why is your price a bit higher than other Chinese suppliers?

Answer: To meet the requirement of different customers and areas, our factory manufactures various kinds of quality for each item at a wide range of price. We can offer the products of different quality levels depending on customer's target price and quality requirement.
 
(3) How can I get a sample?
 
Answer: Normally small samples  can be sent free of charge and customers just need to bear the shipping charge, or you can provide your DHL,FEDEX,EMS,UPS courier account number to us. For bigger sizes, it depends.

(4) How can you guarantee the quality of mass production is same with the sample sent to me before?

Answer: Our warehouse staff will leave another same sample in our company, with your company name marked on it, which our production will be based on.

(5) How can you deal with quality issues that customer feedback after receiving the goods?

Answer:
1) Customers take photos of unqualified goods and then our sales staff will send them to Engineering Department to verify. 
2) If the issue is confirmed, our sales staff will explain the root cause and take corrective actions in coming orders.
3) Finally, we will negotiate with our customers to make some compensation.

Move your finger and contact me without hesitation !