8 Port Gigabit Switch with 7 PoE port

OVERVIEW

The ZQ-POESG-8-7 Power Source Convenient switch combines an small-high efficiency 8-port 10/100 /1000Mbps switch with 7 PoE port.

 

The ZQ-POESG-8-7 PoE switch use an external 18VDC to 57VDC power adaptor. All 7 PoE Ethernet ports can provide 30W power as well as 10/100/1000M data transmission over standard readily available Cat 5e/6 cables.The ZQ-POESG-8-7 PoE t allow for data and power to be transmitted over a single Ethernet twisted-pair cable to the attached devices.

 

The ZQ-POESG-8-7 switches is Power Source Equipment (PSE) and fully compatible with Powered Devices (PD) that comply with the passivet PoE standard, allowing users to attach any PoE compliant device such as wireless Access Points (APS), VOIP phone, IP camera, printer and Network Attached Storage (NAS) to the PoE Switch without requiring additional power.

 

On a network. The unit is designed with home and small business users in mind and is a cost effective solution for environments where AC power is not available or too costly to install.

 

FEATURES

*8 switch ports with 10/100/1000Mbs auto detect operation with status LED

* Available power supply options

18 volts, 24 volts, 48 volts 56 volts

30 watts, 60 watts, 120 watts

100 to 240 volt AC input, 50 or 60 Hz high efficiency

*7 always on PoE outputs with either Mode A and/or Mode B

Mode A power and data on pins 12 (-) and 36 (+)

Mode B power or pins 45 (+) and 78 (-) with

data on pins 12 ,36,45 and78

* Dual PTC fuses on each PoE output port

One 650 ma fuse per port for Mode A

One 650 ma fuse per port for Mode B

*18 volt to 56 volt operation

* Function switch on/off Mode A/B

* Power supply inputs

2.1mm power connectors, center positive

Mode A input with LED status

Mode B input with LED status

LED indicates 18/24 volt operation or 48/56 volt operation

Maximum input current per mode – 2.5 amps

Mode B PoE power input from the uplink port – 1 amps max

* Dual Power supply operation

Redundancy - 48v 802.3af only – see text

Load balancing – 48v 802.3af only – see text

Mixed voltage – Mode A at 48v and Mode B at 24v – see text

* Uplink port 10/100/1000 Mbs

No PoE voltage out

Auto detect 568 A or 568 B connections

*802.3af emulation ( always on, no autonegotiation)

48 volt in either A or B modes

*Mikrotik, OpenMesh, Ubiquiti passive PoE

24 volt in mode B

 

SPECIFICATIONS

Input 100-240V AC 50/60Hz

Output 18 to 56 V (650ma max per port)

Data 1/2&3/6&4/5&7/8

Power 12/36(Mode A) 45/78(Mode B)

Data In Connects PC/HUB/Switch

Weight 0.85Kg

Ethernet Cable TIA/EIA 568 Cat. 5/6

Data rate 10/100/1000Mbps

Connector RJ-45

Operating Temperature 0°C ~ 40°C

Storage Temperature -40°C~+70°C

Operating Humidity 10%~80%RH

Storage Humidity 5%~90%RH

Certification CE & FCC

Case of material metal work material

Dimensions 192mm×82mm×27mm

 

HOW TO ORDER

ZQ-POES-8-7 PoE Switch 10/100Mbps MODE A&B

ZQ-POEGS-8-7 PoE Switch 10/100/1000Mbps MODE A&B

OTHER

1'U 2x7 port PoE Switch

2pcs of poe switch with rack mount

Application:

VoIP/IP Phone Systems

Wireless Access Point (WiFi AP)

WiMAX Basestation

IP Survellance Camera  

Network Security Cameras

Door Security

POS

Netbook/mini Notebook

RFID Reader

SIP IP Paging

Gateway

Building/Access Control

 

The poe switch does not include the power supply.

 

The power supply is sold seperately. such as 24v 60w, 24v 120w, 48v 60w, 48v 120w, 56v 60w and 56v 120w etc.

 

 SKYPE ID: denglang888