blue 76*10mm nonslip carborundum rounded stair nosing

Installation Guide of blue 76*10mm nonslip carborundum rounded stair nosing

Make sure the sair edges are clean enough first.
1. Clean stair edges with acetone.
2. Apply liquid nails to base of Stair Nosing.
3. Firmly sit Stair Nosing onto stair edge.
4. Drill holes using masonary bit.
5. Gently tap in the fixing.
6. Screw the fixing up tight.
7. Clean top recess with acetone.
8. Finish installation of stair nosing profile

FAQ for blue 76*10mm carborundum rounded stair

1. Factory?  
Yes. MEISHUO is a 14-year factory, leading manufacturer of stair nosing, expansion joint and movement joint system, skirting, aluminium entrance mat and so on.
2. Where is your factory located?
Our factory is in city Nanjing, near Shanghai, 2 hours by plane to Guangzhou. Welcome to visit our factory!
3. Samples available?
Yes. We're glad to produce samples for evaluation, normally samples be ready in 3-5 days.
4. Customized sizes or designs available?
Yes. We're glad to manufacture the goods according your drawing or sizes by opening new mold if necessary.

Meishuo Warranty

Meishuo warrants that its products are manufactured free of defects and conform to the technical data listed. Under this warranty, we will replace any material proven defective when applied in accordance with our written instructions for applications recommended by us as suitable for subject products. Meishuo shall not be liable for any injury, loss or damage, direct or consequential, arising out of the use of the product.

Contact us if any questions---  blue 76*10mm carborundum rounded stair nosing

Joyce Zhong

Mob: 0086-15150697708  Whatsapp:008615150697708   Fax:0086-025-58196399