Competition features:

Good quality, prompt delivery, competitive price, environmental protection products, accept small order

Sales target market:

Taiwan, Hong Kong

Product description:

Product name: 5050 RGB lamp bead

Size: 5.0 * 5.0 * 5.0 mm

Brightness:

R: 650-800 MCD

G: 1500-2000 MCD

B: 400-450 MCD

Band:

R: 620-625 nm

G: 520-525 nm

B: 465-470 nm

Working voltage:

R: 2.0 to 2.2 V

G: 3.0 to 3.2 V

B: 3.0 to 3.2 V

Power: 0.2 W

Light color: RGB/controllable iridescence Full color

Working current: 60 ma (single chip 20 ma)

Packaging quantity: 1000 PCS/volume

Use scope: digital tube remote control car lamp lights flash lamp lantern lights, etc

One, the product features:

1, using imported chip; Features: high brightness, low attenuation, small energy consumption, long service life. Antistatic ability. Products are using silica gel encapsulation, accord with environmental protection products lead-free process requirements.

2, high brightness, light color one good cause;

3, LED strips life: > 50000 hours;

4, using high quality imported from Japan silicone glue encapsulation, low light failure, long life;

5, adopt import formal qualified chip, the Internet the fluorescent powder, quality assurance;

6, quality assurance, the price is reasonable, the conventional have inventory, very timely delivery.

Remark:

A) material welding number less than 2 times.

B) please don't stress LED lights when welding.

C) after welding temperature is not back to normal temperature do not distort when the circuit board.

Second, the manual welding specification:

Manual welding, solder iron temperature is not higher than 300 ℃, each welding foot welding time not more than 3 seconds

Three, storage specification:

1. Please don't open before was not prepared to use the LED anti-static bag.

2. LED before unopened shall be kept below 30 ℃, humidity below 60% of the environment, the longest shelf life is 1 year.

3. Treat after opened the package, LED to save below 30 ℃ / 40% humidity condition, and must be used within seven days.

4. If the LED is beyond the point 3 request, must pass through baking to use the LED, baking conditions for: 60 + / - 5 ℃, about 12 hours.

Four: SMD precautions:

LED to seal preservation in dry environment, prevent LED moisture absorption.

2. Before use, to ensure that the bags in good condition, (such as: bag breakage, leakage, need to return to my company, dehumidification, again to vacuum packing).

3. The recommended application manufacturer: open after the bag, even the turntable one directly into the oven, adjust temperature 60-70 degrees, bake for 12 hours, then take out the welding reflow soldering.

3528.5050 welding advising clients to use reflow soldering, with iron is not recommended for the manual welding, solder iron temperature one kind is beyond 300 degrees, easy to burn out the chip.

5. Reflow soldering temperature welding using 220-220 degrees, for the most suitable (one for 5050 of reflow soldering temperature below 3528.5050 welding temperature are the most suitable 220 plus or minus 5 degrees)

6. The product warranty for two years, if you have any questions in the process of production can be feedback to the company, if it is man-made or problem caused by improper operation of the company is not responsible for.

Shenzhen blue opticon electronic technology co., LTD., founded in 2006, is one specialized is engaged in a variety of. In the development of high-grade LED light-emitting diodes. Production. Sales and service of high and new science and technology enterprises.

Company product variety is complete, mainly has each kind of specification/brightness (red, yellow, green, orange. Blue. White. Blue. Pink) LED light-emitting diodes, two-color, full-color, colorful LED, special LED backlight, special LED display screen, infrared transmitting tube. The infrared receiving head. Photosensitive tubes. SMD leds. There are straight plug, patch, piranha, high power, and other forms of packaging, can also according to customer requirements to develop special types of LED products. Product quality and technical indicators have reached the international standard and passed the ROHS environmental testing.

The company specializes in development and production of LED series products, has a variety of display mode of operation. Simple to use, easy to operate, according to uniform, clear design, reliable performance, guarantee products of modern society needs to slow again, save the energy to do the best social benefit. Widely applied in all kinds of home appliances, digital, communications, automotive electronics. Lighting. Electronic toys. Traffic instructions. Designs city-lighting project and related production enterprises.

The company with "professional, innovation, professional, efficient, let every one a user satisfaction is our eternal pursuit of the service spirit of", we would like to be the latest technology and perfect service dedicated to every customer. One up to cooperate with you and we hope to create a better tomorrow!