Stone / marble shot blasting machine

 

 

Product Description

 

 

Features:

Stone blasting machine is mainly used for the surface roughness processing of marble, granite, artificial stone, etc., increase the stone surface friction coefficient, improve ornamental value

 

This machine with continuous feeding and high efficient continuous operation , has large processing batch, in cleaning process,when the workpiece is feeded in the blasting area of chamber by the frequency conversion motor drive roller with electric control ,each side of the whole body gets powerful and intensive shot hit and friction from different coordinate azimuth ,thus make the oxide skin and dirt of the stone surface quickly drop,so as to get around bright and clean surface with certain roughness surface.the shots Falled into the surface of workpiece and the tiny dust and rust was delivered to the projectile circulation system by recycling spiral conveyor , loading/unloading at both sides of chamber outside

 

In today increasing development of the stone processing technology ,this technology undoubtedly fill up the blank of stone roughness processing ,supply one new try for the stone use, and provide a brand-new field in stone facing materials for building designers. In modern stone industrial field, this newly processing technic must get large develop, with novelty, inexpensive, well-adapted, good decorative charicteristics, the blasting matt surface products will bring out extensive apply spaces.

 

The machine is suitable for surface treatment of various stone,tile,marble,floor tiles. after treatment ,The stone surface with high non-skid property, good planeness and strong third dimension win good reputation from many clients.

 

This machine with big batch processing and high efficiency, can produce more than 1200M2 common artificial stone block per shift, even 800 M2 for hardness stone, and leave the hurt to human body by collector treatment, accord with national environmental requirement.

 

With compact structure, strong and durable, high dust removal efficiency, Good treatment effect, This machine is a good helper for stone processing enterprises.

 

The same model of different side steel plate shot blasting macnine

 

No	Name	Unit	Type1	Type 2	Type 3
1	The width of the workpiece	mm	Under 2500	under3500	Under 4500(plate)
2	Model		QXY2000,QXY2200, QXY2500	QXY3000,QXY3200, QXY3500	QXY3500,QXY4000, QXY4500
3	Plate width (Max)	mm	The number after QXY	The number after QXY	The number after QXY
4	Plate thickness		3~60	3~60	3~100
5	The smallest section of profile	mm*mm	60*80	60*80	------
6	The largest section of profile	mm*mm	1000*300	1000*300	------
7	The shortest workpiece	mm	2400	2400	2400
8	Maximum workpiece	mm	12000	12000	12000
9	Conveyor speed	m/s	1~5(Note)	0.5~4(Note)	4~6(single)
10	Derusting Quality Level		ISO8501-1,1988	Or GB8923-88	(Bsa2.5)
11	Surface roughness	μm	40~70	40~70	40~70
12	Paint Film thickness	μm	15~25	15~25	15~25
13	Paint type		Quick-drying-type zinc-rich primer	Quick-drying-type zinc-rich primer	Quick-drying-type zinc-rich primer
14	Installed Power	kw	According to the actual situation	According to the actual situation	According to the actual situation
15	Compressed air consumption	m3/min	5~7	5~7	5~7
16	Compressed air pressure range	MPa	0.4~0.6	0.4~0.6	0.4~0.6
17	The first addition of the shot ball	T	8~10	8~10	12~16

 

 

Other roller through type shot blasting macnine

 

Parameter	Q698	Q6912	Q6915	Q6920	Q6925	Q6930	Q6940
The effective cleaning width(mm)	800	1200	1500	2000	2500	3000	4000
Dimesion of inlet opening	1600*800	1200*400	1700*400	2200*400	2700*800	3200*800	4200*400
The length of cleaning workpiece(mm)	1200-12000	1200-1600	1200-12000	1200-12000	3000-12000	2400-12000	4500-18000
The speed of conveyer(m/min)	0.5-4	0.5-4	0.5-4	0.5-4	0.5-4	0.5-4	0.5-4
The thickness of cleaning steel sheet (mm)	3-60	3-60	1.5-60	3-60	3-60	3-110	4.5-100
Shot ball flow rate (kg/min)	4*120	4*250	4*250	6*250	6*250	6*360	8*360
The shot ball first loading (kg)	4000	4000	4000	4500	4500	8000	11000
Roll brush adjusting height (mm)	200	200	350	450	600	850	900
Air capacity(m3/h)	22000	17560	19000	19550	27758	28050	38000
Total power (kw)	90	78.3	113.5	156.6	204.8	224.55	293.6

 

 

 

FAQ

 

 

We can do all kind of shot blasitng machine according customer's need

Before inquiry we hope you can send us the following information with your inquiry letter, so that we send you the technical drawing and technical proposal at the first time!.

1. The max. Length of the workpiece.

2. The max. Width of the workpiece.

3. The max. Height of the workpiece.

4. The productity you need to blasting the workpiece ( how many T or piece per day or per month?)

5. The power supply you need ( such as 380V, 3P, 50HZ)

6. Better to send us the workpiece photo or drawing.

 

 

 

 

Our Services

 

 

Some of our customer and other model machine

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Same model machine

 

1.QXY2500 Steel plate and profile shot blasting and painting line export to Bangladesh in 2011

 

2.QXY3500 Steel plate and profile shot blasting and painting line export to Turkey in 2012

 

 

3.QLY3500 Vertical Steel plate shot blasting machine export to Saudi Arabia in 2012

 

 

 

 

 

Company Information