Specifications

1) Item No. CT4
2) Main line(mm2) :25-70
3) Branch line(mm2): 6-35
4) Nominal current(A): 55A
5) Bolt number:1
6) Main dimension(mm)
7) Application Voltage≥1KV
8) Piercing depth(mm) :1-3

Feature

1)Simple installation,small contact resistance and low temperature rise of the clamp.
2)The applicable voltage is 10KV,1KV or less than 1KV.
3)Piercing connector,simple installation,need not strip the cable coat.
4)Moment nut,piercing pressure is constant,keep good electric connection and make No

damage to lead.
5)Self-seam frame,waterproof,and anti-corrosion,extend the using life of insulated

lead and connector.
6)Adopted special connecting tablet,apply to joint of Cu(Al) and Cu(Al) or Cu and Al.
7)Small electric connection resistance,impulse currentcan be up to 15Ka.
8)Special insulated case body,resistance to illumination and environmental aging,the

insulation strength can up to 6KV.
9)Aac surface design,apply to connection with the same(different)

diamater,windconnection scope(0.75mm2--400mm2)

Mainly application:

The connection of main circuitries,the connection of main circuitry and outdoor

circuitry,the connections of main circuitry and electric appliance and street lamps
Applicable to T connection of structural distribution system,the connection of airy
low voltage insulated cable,or indoor electric wire,distribution system of street

lamp.
Can be installed with online line and can work without power.