Aluminium alloy ingots for die castings:
Japanese Industrial Standard; JIS H 2118:2006:  ADC12
LME Registered Brand

Element Composition, %
Cu 1.5 - 3.5 within range
Si 9.6 -12.0 within range
Mg 0.3 maximum
Zn 1.0 maximum
Fe 0.6 – 1.0 within range
Mn 0.5 maximum
Ni 0.5 maximum
Sn 0.2 maximum
Pb 0.2 maximum
Ti 0.30 maximum
Others each ** -
Others total ** 0.50 maximum
Aluminium Remainder

Physical properties
Density: 2.7
Melting Point: 835 K
Specific Heat: 0.96 J/gk
Thermal Expansion Coefficient: 22x10
Thermal Conductivity (cgs): 0.23
LACS% 23

Each ingot weighs approx. 6.0 kgs. +/-2% (165 ingots per bundle)
L700mm x W120mm x H40mm
EN 683-1:2004 Dimensions tolerance
Packing: In bundles of approx. 1,000 kgs net each.
or
T-bar/Saws
Min / Max weight: 727.5 kg / 772.5 kg
Normal weight 750 kg