I. Main function: Mechanism forming, special automatic feeding, sealing, perforation, embossing and blister cutting. Suitable al-pvc & al-al blister packing for tablets, capsules, irregular tablets, etc.

II. Characteristic:

1, DPP-250S Blister Packing Machine could fission pack to enter lift and division cleaning workshop, adopt column pin location, bolt-fixation, easy to serial production.

2, The die locate day location pin with precision, and press-board dress up.

3, Main motor adopt frequency control: (punch frequency is 50 times/min). It can enact corresponding punch frequency according to travel and fulled feeding easy or hard factor.

4, Adopt engine-hand nip draw station, running steadily, synchronization nicety, change travel and design the plate size at will on the range of 40-120mm.

5, Forming and heating plate close and open automatically, it could protract time to boot-strap after put down heating plate, limit wasting material less than one edition.

6, Air bed sealing, net-plate is hoisted by cylinder while stop. Avoid making blister metamorphose by heat radicalization while settling, easy to clean the net-plate also, at the same time, play the role of buffer when Overpressure, is propitious to prolong machine usage life.

7, Up-lower net-plate male and female work in heat-sealing, there are punctuate net-veins on the positive and negative(could line-pressurize also). Because two side stress are equality, make plate more level-up, improve pressurize capability as well.

8, Alarm and stop while PVC is out and discretion, easy to replace and add PVC on time for work man.

9, All hardware and container are contact with medicament, adopt stainless steel and innocuity produce, accord with “GMP” request