~Product description

Type 828 glazed tile equipment before use, to check everywhere connection is reliable, installation bolts and nuts are tightened, should add the lubricating oil around the chassis and can be electrified start machine commissioning, careful observation of the first empty running, there is no vibration, noise, oil and whether the window to oil, the components are coordinated, everything is normal to install mould, installation mould must cut off the power supply, by manually moving the motor belt or gear, workbench inversion, and the sliding seat rises to the highest point, it is best to use an object is supported on the workbench and a sliding seat bottom surface between, in order to prevent a natural whereabouts, causing the accident. This machine is used to mould for a mould and six different size of the lower die, the installation of the first upper die and a lower die, die installed directly in six rotary worktable, mould installed on the sliding seat bottom surface, and the appropriate thickness of the plate is placed, guarantee of die mould clamping, around the edge of the gap is uniform, lower die between distance equal to the thickness of the tile billet. And then the above mode is the standard, the work of the transfer, the rest of the five to install the mold, all installed on the upper and lower mold to drive the pressure.（www.caigangjx.com）