Product description

Bending machine is divided into manual bending machine, hydraulic bending machine and CNC bending machine. Hydraulic bending machine in accordance with the synchronous way can be divided into: the axis of the synchronous machine, the synchronous machine, and electro hydraulic synchronous. Hydraulic bending machine according to the movement way and can be divided into: on the dynamic, the next move type. The bending machine belongs to the hydraulic bending machine.(www.caigangjx.com)

4-6 meter bending machine using method

1, the first is connected to the power, in the control panel to open the key switch, and then press the pump to start, so you hear the sound of the pump rotation. (at this time, the machine does not move)

2, stroke adjustment, bending machine use must pay attention to adjust the stroke, in the bend before must test. When the bending machine is down to the bottom of the bottom, there is a need to ensure that there is a thick plate gap. Otherwise it will cause damage to the mold and the machine. Stroke adjustment is also an electric fast adjustment and manual adjustment of the stomach.

3, bending notch, notch in general to choose the thickness 8 times the width of the. Such as plate bending 4mm, need to choose about 32 slot.

4, after the adjustment of the material is generally electric fast adjustment and manual adjustment, method with cutting plate machine.

5, step on the foot switch to start bending, bending machine and cutting plate machine is different, you can at any time to release, release the foot brake will stop, in the continued down.