CA22

Rated Power at 8ohm stereo: 2x1500 W

                  4ohm stereo: 2x2450 W

                  2ohm stereo: 2x2900 W

Mono Bridge at 8ohm bridge: 4200W

4ohm bridge: 5600 W

Sensitivity: 0.775V、1.0V、1.44V（± 5％）                           

S/N ratio:≥105dB                           

Phase response: within ±5°                          

Slew rate ≥60 V/us                       

Total harmonic distortion≤0.05%          

Net Weight: 39kg

CA series amplifier feature:

1. With advanced SMT technology, reduce solder defect, tidiness craft, lightweight
2. Use import small capacitor and TOSHIBA transistor
3. Under 800W use two grade class H circuit
4. Above 900W adopt three-grade class H high effect power supply, work temperature is lower, it make amplifier more stable.
5. Special circuit: Output midpoint automatism ZERO adjust circuit, when without DC output will automatism adjust circuit and protect speaker
6. Add special high temperature static state NTC circuit, amplifiers long time work more on stable.
7. Perfect protect: Soft startup protect, short circuit protect, limited protect, high temperature protect, over load protect
8. Mode: Stereo、Bridge、Parallel
9. Inside have crossover can adjust low pass, by pass and high pass
10. High signal noise ratio ≥105dB
11. high damping factor≥800
12. Total harmonic distortion ≤0.05%
13. slew rate ≥60 V/us

It can be used for large performance, indoor / outdoor concert, nightclub, stadium, theater, speech etc.