gravel pack multilayer wedge wire sand control screen tube for oil well

Technical patameter

 

The V-shaped wire can be made in different height and width to address various strength application, meanwhile, the spacing of individual slots can be varied during fabrication if geologic conditions require these variations in a screen's construction.

 

 

end connection type:

 

welding ring

flanged

without connection

API thread

 

  

Specification (wedge wire):	Width(mm): 1.50 1.80 2.30 3.00 3.30 3.70 Height(mm): 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00
Specification (support rod):	Width(mm): 2.30 3.00 3.30 3.70 Height(mm): 2.70 3.60 4.70 5.60 6.30 Round: From 2.50mm to 6.0mm
Note: other specifications available as per request
Slot size	0.10, 0.15, 0.20, 0.25, 0.30…… 6.00mm also achieved upon request.
Material:	galvanized low carton (LCG), stainless steel (304,316 etc.)
Length	up to 6 meters.
Diameter	from 25mm to 1200mm.
End connection	Plain beveled ends, flanged or threaded couplings

 

 

 

Application

 

The continuous-slot well screen is widely used throughout the world for water, oil, and gas wells, and is the dominant screen type used in the water well industry. Used in coal,mine,water treatment etc.

 

The continuous-slot well screen is recommended in the following situations;

 

• Formation comprised of small or fine particles
• Water wells where gravel packs will be installed
• Thin aquifers, where maximum open area is required
• Small diameter wells

 

 

Packaging & Shipping