1. Brief introduction:

 

 This coal rod extrusion machine is the device of using the screw extrusion principle to squeeze the charcoal powder, coal powder materials and other materials (chemical materials, refractory materials, cement materials iron ore, copper or other metallurgical materials) into certain density stick shape briquettes (round, rectangular, hexagonal, plum-flower, triangular etc.) with or without hole in the middle.

 

2. The Parameters:

model	Individual output（t-h）	power（KW）	Coal rods machine across the section shape（mm）	rotational speed（rpm）	Spiral impeller diameter（mm）	Spiral number	Overall dimensions（mm）
RYMBJ 140	1-2	11-15	Φ20-30	46-60	φ140	5	1900×1100×1170
RYMBJ180	2-3	18.5-22	Φ20-30	39-60	Φ180	5	2210*1370*1440
RYMB300	4-6	90	Φ18-30	132	Φ270	4	3605*1025*955
RYMBJ450	8-12	220	Φ20-30	118	Φ420	4	5130*520*1480
Pulverized coal particle size (< 5 mm)      pulverized coal water content (12-14%)

 

3. The Advantages:

 

1. Our this coal rod extrusion machine absorbs the advanced technique at home and abroad.

2. Innovative design and reliable quality. The vane wheel is thickening blades which are made of wearing steel materials, and the lifetime will be 4-5 times higher than the normal.

3. Our coal rod extrusion machine adopts hard tooth face reducer, although it is small volume, but it has the high bearing and carrying capacity.

4. Key parts are processed by imported high quality materials. The forming barrel are made of wearing removable alloy steel, and it can be easily changed and replaced.

5. The coal rod extrusion machine head and barrel are installed by the way of splicing, which is convenient for changing the vane wheel when we check and fix the machine.

6. High strength and toughness.

7. Temperature control, durability, adaptability.

8. High production capacity.

9. The mold of this machine can be changed for making different shapes charcoal.

10. Besides the normal products, we can also design and manufacture special moulds as the customers’ requirements.

11. The customers can purchase complete machine with other kind of moulds, then the machine can be multipurpose, and the customers can save capitals.

 

4. The final coal briquette:

 

A. The requirements of feeding materials:

1. The inlet particle size of materials must be less than 5mm.
2. We have to add suitable binder for some kind of materials for shaping easily.
3. The moisture of materials must be moderate, and the water content usually is 12%-14%.

 

B. The final briquettes of coal rod extrusion machine:

1. The outlet shapes can be round, rectangular, hexagonal, plum-flower, triangular etc.

2. With our special binder, the outlet briquettes are of high density, esay shaping, smokeless, easy fire, long burning, etc.

3. Smooth surface and convenient to store and transport.

4. The final briquettes usually used for BBQ, burning for stove, cooking, etc.

 

5. The production line:

 

 The production of make coal briquettes is: Crushing --> Mixing --> Feeding --> Briquetting. 
We can equip the automatic production and semi-auto production line according to your requirements.

 

6. The packaging and shipping:

 

1. Single coal rod extrusion machine will be packed in the standard wooden case with steel frame, then load into 20/40’ container.

2. We also can package the machine according to your requirements.