UNIVERAL REMOTE CONTROL

4 channel universal remote control duplicator Copy Code Remote 433 mhz learning garage door opener free shipping

1. Metal and PVC remote control duplicator
2. Encoding type: copy code, use special chip,can copy other remote control face to face, can be used alone
3. High stability:Adopting imported SMT component SAW and super high frequency audion(6.5G)
4. Remote Control Duplicator voltage:DC12V
5. Operating Current:<=12mA
6. Transmit Power>=10mW
7. Transmission speed:50-60KHz , Button ABCD
8. Frequency:433MHz or 433.92 (Leaving a message when you place order)
9. Frequency windage: ±0.2MHz
10. Transmission distance: 20-30meters (open space)
11. This item suitable for home use. The rolling codes can't be copied
12. Using Range(IC):2260,2262,HT6P20B,HT6P20D,HS1527,EV1527..etc fixed code and learning code remote control

Instruction:

1. Clear code: Pressing the 2 buttons( open button and close button or “A”and “B”) in the first row of  the remote control at the same time, then release your hands when the light flashing.   Clear successful identification method is press any of four buttons on the remote control , the indicator light only flashes once then go off.

2.Remote Control Duplicating:    One hand holding the original remote control , another hand holding a copy of the remote control, two remote control as close as possible,   press two open buttons of  the remote control at the same time, remote control indicator flashes quickly , that means copying success, then release your hand.   Followed by the same method, copy the other three buttons. (If the light is not flashing when copying, you can change the position and try again)

3.How to recovery ?

If you removed the code by mistake, please press the 2 buttons of  the second row of the remote control at the same time, then the light will flash quickly, please release your hand, the information recovery is completed

More information Please Contact us:sales01@yedear.com