Performance and features

1. Zero-voltage scanning soft start, start or stop at any time under any state without impact on power supply;

2. Speedy melting, low production cost, low pollution, conforming to environmental protection requirement;

3. Melting directly from low temperature, available for fully emptying of solution, easy change of category of

melting material;

4. Flexibly adjustable power, easy and continuous smooth adjustment, easily controllable temperature, low oxidization loss, uniform

metal content;

5. Furnace shell with cast aluminum ally or steel shell construction, small footprint, easy overturn body, available for selection of electric,

manual, hydraulic or other overturn mode as needed;

6. Contravariant automatic regulation circuit available for matching of load impendence automatically, maintaining good operation without

regulation or compensation of capacitance; power supply with fault diagnosis facilitating service.

===Main Models And Technical Parameters===

※ Melting time and power consumption/ton is important to equipment power, raw material shape and weight, operator’s skill level and

other elements;

※ Power parameters shall be subject to steel melting; lower power is required by melting of copper, aluminum, zinc or other material with

low melting point; please consult Hengyang Technical Department for specific data;

※ Configuration: an intermediate frequency power supply, a capacitor cabinet, an overturn control cabinet, body, two sets of reduction

boxes and supports, two water cooling cables, etc.;

※ The above data is of standard model. We also provide customized non-standard products with different power or melting speed.