UKREXPORT has direct access to Ukrainian and neighboring producers of hot-rolled or cold-deformed steel for reinforcement of ferroconcrete structures. Reinforcement Steel here is produced according to local domestic standards only:

GOST 5781-82: Hot-rolled steel bars for reinforcement of ferroconcrete structures.
Diameter: 6-80mm; Length: 6-12m or within 5-25m
Packing: 6-8mm in bundles, 10-80mm in bars
Classes depending on physical limit of fluidity within 235-980 N/mm2:
A1 (A240) – smooth surface
A2 (A300), A3 (A400), A4 (A600), A5 (A800), A6 (A1000) – periodically twisted surface

GOST 10884-94: Thermomechanically hardened steel bars for reinforcement of ferroconcrete structures.
Diameter: 6-40mm; Length: 5.3-13.5m and up to 26m
Packing: 6-8mm in bundles, 10-40mm in bars
Classes depending on physical limit of fluidity within 440-1200 N/mm2:
AT400C, AT500C, AT600, AT600C, AT600K, AT800, AT800K, AT1000, AT1000K, AT1200 – periodically twisted surface
T – thermomechanically hardened
C – weldable (in a butt joint)
K – corrosion-resistant

GOST 52544-06 (specialized): Weldable steel bars A500C (hot-rolled) and B500C (cold-deformed) for reinforcement of ferroconcrete structures.
Diameter: 6-40mm (A500C); 4-12mm (B500C); Length: 6-12m
Packing: 4-6mm in bundles, 6-12mm in bundles or rods; 14-40mm in bars
Classes depending on production, physical limit of fluidity 500 N/mm2:
A500C (weldable, hot-rolled or thermomechanically hardened) – periodically twisted surface
B500C (weldable, cold-deformed) – three-sided crescent-shaped or four-sided segmental section

A limited number of steel grades is admitted for making the above Reinforcement Steel, mainly common carbon & low alloyed steels. Minimal order quantity is 1000MT because this is minimal capacity of a single blast furnace where requested steel grade for requested type of Reinforcement Steel is to be smelted. Please note: Any original production of Reinforcement Steel at that or other factory is not open public process. Inquiry for particular production/offer/price has to show authentic information: 1) who (what company) is buyer/importer/consignee; 2) where (what bank) his payment is to come from: 3) how (in copies of docs) he bought/imported/consumed Debars/Rebars last time, to prove 1) and 2).