Detailed introduction:
Kaishan brand 15KW/20HP screw air compressor
Model: LG-2.4/8B
Exhaust volume: 2.4m3/min
Working pressure: 0.8MPa
Motor power: 15kw
Exhaust port: G1
Weight: 550Kg
Dimension: 1060*800*1230
Pioneer Electric fixed screw air compressor
Operating cost of economy
The system uses 0-100%'s exhaust capacity stepless adjustment. When the gas consumption reduced hours, exhaust volume decreases, the current of the motor also reduce; when do not gas, air compressor running empty, empty for too long shut down automatically. When the air consumption increases, the recovery of heavy truck. Energy saving effect optimization.
Good environment adaptability
Extraordinary cooling system design, especially suitable for high temperature, high humidity environment in asia. Excellent vibration isolation and noise reduction measures, the pioneer brand screw air compressor do not need to install special foundation, as long as set aside to minimum ventilation and maintenance of the space, can find a place for good your compressor.
Highly effective and reliable imported host
SKK injection twin screw air compressor.
Design features of SKK series screw rotor profile:
Using the derived from British technology of a new generation of SKK series screw rotor patent type line, the structure for bilateral asymmetric Yang rotor and female rotor and its type line composition curves are circle arc and its envelope, the tooth number ratio determined considering the different requirements of different power, small power rate (less than or equal to 45KW) models for 4:5 and high power of more than or equal to 55kW 5:6. The patented rotor has two outstanding advantages compared with the existing other rotors:
A, the full realization of "song in the face of the curved surface of meshing, thus helping to form hydrodynamic lubrication film, reduce by contact with the transverse leakage, improve the efficiency of the compressor; and the improvement of the rotor machining and inspection performance.
Second, the use of the design idea of "big rotor, bearing and low rotation speed, speed than other brands of low 30 ~ 50%, can reduce noise and vibration, reduce exhaust temperature, increases the rigidity of the rotor, to extend the service life, reduce sensitivity to impurities and oil carbide.
Three, power range 4~355KW, in which the 18.5~250KW are not directly linked to the gear box, 200KW and 250KW more 4 pole motor direct coupling, the speed is as low as 1480 rpm.
Four, fully meet or exceed GB191532003 "volume type air compressor efficiency limit value" the requirements of the national standard.
Design features of SKK screw host:
A, SKK screw mainframe design using the idea of rotor, bearing, low speed, main models of high power are used without gear box directly connected, in low speed at the same time, reducing the fault source, can improve the stress state of the host.
Second, the integral casing, and the rear bearing seat and compression cavity integrated processing, ensure tolerances of form and position of the coaxial degree, parallelism and perpendicularity and then ensure that the the reasonable clearance.
Three, the axial force and radial force of the rotor by different bearing, and the use of the world's top SKF heavy-duty bearings.
Four, the main engine inlet and outlet, the opening time, the injection port, return oil port position and so on according to the latest research results design, internal pressure ratio is reasonable, oil gas heat exchange.
Five, not only low noise, and the noise frequency is lower than that of other brands 30 ~ 50%, reduce the human ear stimulation.
Six, the bearing by the circulating oil flow for flushing, cooling, lubrication, effectively improve the working conditions of the bearing, reduce the operating temperature of the main engine.
Seven, the main structure is simple and reasonable, mature and reliable, low failure rate, easy assembly and maintenance.
Eight, by the national laboratory test, the main performance indicators such as power, noise, vibration, reliability, etc..
Machining test method for SKK screw machine:
Fine processing and testing all of the imported world-class processing equipment, such as the United Kingdom of the outer circle and the end surface grinder, screw tooth grinding machine. Machining center of japan. Germany's rotor balancing machine, the measurement of the three coordinate measuring machine, and so on, to ensure that the product is perfect to achieve the design requirements.
Superior electrical control operating system
The unit adopts intelligent microcomputer control system, with powerful fault diagnosis and protection function, can be in the case of unattended 24 hours for your work. Such as the failure of the unit, the system will be based on different situations to make the corresponding response, timely and prompt you to replace the other parts and make the necessary maintenance. Operation is particularly simple, one touch that is automatically operated state.
First each screw machine support frequency
According to the requirements of users open function of the inverter, inverter screw compressor in the scope of delivery of the mountains: power from 5.5kW to 280KW flow from the 0.6m3/min to 45m3/min and exhaust pressure from 0.5MPa to 1.3mpa, air-cooled, water-cooled, transmission belt and straight connecting transmission multiple configurations.
Pioneer inverter screw machine features
Using international famous brand inverter module, via special strengthen special motor for the lifting speed characteristics, using a particularly suitable for the PID parameters of screw compressor, control software experienced hundreds of compressor assessment the of, easy parameter setting, man-machine interface is friendly. In order to adapt to the humid tropical climate, the cooling of the inverter was designed. To support the user to set the best working pressure, and increase the oil gas separator filter area.