~~Operating Manual for Standard Metal
Measuring Apparatus
(Oiling Machine Self-checking Standard Apparatus)

1. Nominal capacity:1-10000L
2. Material: stainless steel with 1 chromium 18 nickel 9 titanium
3. Functions and technical indexes: stable functions, strong corrosion resistance, its nominal capacity and precision will not be changed after long-time use.
4. Application guide:
(1) First pour a certain amount of liquid to be tested into the standard metal measuring apparatus(standard apparatus for short) to make its inner wall moist.Then pour out the liquid and keep trickling for 2 minutes and then put it level, waiting to be used.
(2) Put the gun of the oiling machine into the metering neck of the standard apparatus and turn on the oiling machine. When 1-10000L of oil runs out, turn it off. After there are no oil bubbles inside the standard apparatus, observe the liquid level of the metering neck of the standard apparatus so as to know if the oil pump capacity of the oiling machine is qualified.
(3) When the reading of the staff gauge is 0, at 20℃ its standard capacity is 1-10000L, each graduation higher or lower is 10-20ml.
5. Clean the standard apparatus after use and store it in a shockproof, non-corroding and dry room.
6. Strictly forbid colliding when using it. If unevenness occurs because of collision, it must be repaired and inspected by the departments concerned before reusing it.

If  you  have  any  question,  you  can  contact  with  us :
Ryan Lim
Manager
Cellphone:44-07481-227725
Tel: 86-0317-6627261
Fax:86-0317-6618717
Website:http://www.hxjiliang.com
E-mail:415277103@qq.com