Specifications

Floor Heating System Panel 
1. Low increase to floor 
2. Save power & keep heat upward 
3. Sound insulation 
4. Light & easycut 
 

Underfloor Heating System Panel

Underfloor Heating System Panel which has a return side to other side is an efficient thermal insulation material in underfloor heating system.

The hot pipes can be installed into the grooves, if the XPS board is covered by aluminum foil or aluminum panel, the energy could be spreaded efficiently and evenly.

 

Characteristics:

· Pre-laid to falls

· Easy access, floor level ideal for elderly or disabled

· Can be finished with tiles to match surrounding decoration

· Can be cut to fit on site

· Use to create a wet room or enclosed shower area

· Environment friendly(free of CFC and HCFC)

· Preformed(no skilled laying of falls)

· Can be fixed to timber or concrete floors

 

Installation of Underfloor Heating Panel:

1. For tile

A) Clean the exsiting floor and make sure it's flat

B) Glue the aluminum laminated floor heating insulation board on the floor

C) Join the panel with aluminum tape

D) Insert the pipe into the grooves.

E) Install tiles with tile adhesive cement.

 

2.For Wooden floor

A) Clean the exsiting floor and make sure it's flat

B) Lay the floor heating insulation board on the floor

C) Lay the aluminum sheet on the floor heating insulation board

D) Join the panel with aluminum tape

E) Insert the pipe into the grooves.

F) Install wooden floor

 

Technical Data:

		XPS
Density	Kg/m3	38
Thermal conductivity, 90 days, 10°C	W/mK	0.03~0.036
Compressive strength at 10% deflection or yield, (vertical)	kPa	≥
Tensile strength	kPa	≥
Water absorption	Vol-%	<=1.00%
Capillarity	nil	nil
Coefficient of linear thermal expansion	mm/mK	0.07
Temperature limits	°C	-50°C, +75°C

 

Available Sizes:

Thickness	Length	Width	Pipe
25mm	1200mm	600mm	OD16mm
28mm	1200mm	600mm	OD16mm
30mm	1200mm	600mm	OD20mm

Other sizes could be produced accordingly