RE-THERM is thermal insulation resembling a paint in appearance. Thanks to the fact that the materials have thin consistency, they can be applied on surfaces of any forms and structures. RE-THERM is applied by painting materials – a brush, a roller, a spraying gun of high pressure (read more about the techniques of applying in the instructions on modifications of coatings). RE-THERM coatings, including acryl and silicone, possess waterproof properties apart from heat-insulating ones.

All RE-THERM coatings mainly consist of ceramic (a content of ceramic micro-spheres is 75%...85%) and silicone micro-spheres being in a suspension state in a liquid phase of water, an acrylic cohesive and special additives. Such a mixture makes RE-THERM coatings waterproof, flexible and at the same time resistant to external effects (ultraviolet, drops of temperature and humidity).

Heat conductivity of liquid thermal insulators RE-THERM is tens of times lower than that of "classic" insulators. A coating layer of RE-THERM, 1mm thick, applied on the surface, substitutes a layer of mineral wool thermal insulator 5cm thick according to its heat-saving efficiency. Moreover, a tremendous advantage of RE-THERM is an absence of necessity to protect from weather impact (drops of temperature and humidity, exposure to ultraviolet). An operating-temperature range of RE-THERM coatings is -40C… 250C.