led screen potting compound silicone

Model:	HY-215
Brand:	HongYe silicone
Origin:	Made In China
Category:	Chemicals / Rubber Materials
Label:	led screen silicone , Potting compound
Price:	US $15 / KG
Min. Order:	200 KG

Inquire Now

Product Description

Characteristics:

HY210 and HY215 are condensation silicone potting compound in two parts with the characteristics of low viscosity,easy pouring operation,and good bonding feature.it can be cured completely at room temperature.the safety potting compound silicone can reach the EU-ROHS requirements fully.

Application:

Applying for the surface of PC,PP.ABS,PVC,metal,etc

Potting for protection of general electronic module

Insulation,waterproof and bonding of electronics parts

Filling for LED,LCD electronic display,circuit board

Outdoor protection for LED screen

Technical Parameters for PCB Electronic Potting Silicone

Properties index		Part A	Part B
Before Curing	Appearence	Black fluid	Colorless / yellowish fluid
	Viscosisty (cps)	2500±500	-
Features when operation	Mixing Ratio ( By weight)	10:1
	Operating Time (25C /min)	20~30
	Curing time ( hr, basically cured)	3
	Curing time ( hr, perfectly cured)	24
	Hardness(shore A)	15+/-3
After Curing	Thermal Conductivity[W( m·K)]	≥0.4
	Dielectric Strength( kV/mm)	≥25
	Dielectric permittivity(1.2MHz)	3.0~3.3
	Volume resistivity(Ω·cm)	≥1.0×1016
	Fire Resistance	94-V1

(Pls note all data of PCB Electronic Potting Silicone Rubber with black color above is in 25C with 55% humidity conditions. We don't guarantee a same date if testing under different conditions, or when data was regenerated).

Warm Tips for for PCB Electronic Potting Silicone
1. Sealing pakage for storage. The mixture should be used up at once to avoid wasting.
2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.
3. When it gets stratified after a period of storage, Please mix HY-210# evenly before using,
it does not affect the performance.

Package for for PCB Electronic Potting Silicone

1Kg ,5Kg ,20Kg ,25Kg ,200Kg.

Shelf Life and Transportation

1. Twelve(12) months when stored at 25C in original unopened packages.
2. This is a non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.

Technical Guidelines

1. Pls put part A and B in separate container and stir evenly before mixing the two
   parts together.
2. Mixing Ratio part A:part B is 10:1
3. Bubble release if necessary, deaeration the mixture under 0.08 MPa for 3 minutes.
4. HY-215# is cured at roon temperature, so pls put it under room temperature after
   pouring. It comes to next process when basically cured, and it takes about 24 hours
   for completely cured.