1.Application:
HF-S350 NonScratch Die Coater Hot Melt Coating Machine is specially design for producing 
narrow web label.the valid width for selection is 200mm and 350mm.Speed for selection is 150m/min and 300m/min.
2.Main Feature:
(1)Adopt Italy technology Non-Scratch Die Coater,Model HM8.There are rotating bar,makes the surface of the material is very bright,without any line.It is suitable for produce film type label,such as beer label.
(2)Max.Mechanical Coating Speed 300m/min.
(3)Both Unwinder and Rewinder adopt Cantilever structure,easy operation.
(4)Total Machine is controlled by Panasonic servo motor,high precision controlling.
(5)Coating accuracy:+ -1g/m2


4. Main datas:
(1). Adhesive:                 hot melt pressure-sensitive adhesive
(2). Valid coating width:         200mm and 350mm
(3). Roller width:            400mm(Bad on 350mm coating width)
(4). Coating weight:           10-100g/m2
(5). Max.Coating Speed:         150m/min and 300m/min
(6) Glue melting speed of the tank:   85kg/h EVA 165°C 3000CPS
(7) .Unwinding style:           Single Center Unwinder, 3”. Magnetic power brake,
                                                Digital-Indicate tension controller.
(8). Maximum diameter:                          unwinding is Φ650mm, rewinding is Φ650mm
(9). Electrical control method of the complete machine:
PLC controller /Siemens s7-200,10”human-machineinterface operation (WEINVIEW) MT6100
(10). Temperature control method of the hot melt glue tank:
adopts Japan Panasonic or Omron temperature controller, digital display with temperature exceeding alarm function, PID Intelligent adjustment, temperature control scope: 0-250°C
(11). Specification of the glue melting tank and its extruding amount:
the glue melting box adapts Al-alloys to casting and forming, upper and lower 2 layers structure;The inner wall has coated with a layer of Teflon for preventing of sticky. Maximum extrudingamount is 100kg/h and the heating power is 12kw.
(12). Driving motor:                            Panasonic or Inovance servo motor.
(13). Servo Driver:                             Panasonic ( alternative is Inovance.)
(14). Paper core roller:                        Unwinding adopts of 3”air shaft.
(15). Power supply:                             380V,3Phase,50Hz.
(16). Input power:                              Installed power rating 25kw
(17). Cooling water:                            temperature is 16-25° C, flux is 1 CBM/hr,water pressure is 2kg/cm2
                                                (will be prepared by Buyer)
(18). Compressed air supply:  Air pressure is above 5kg/cm2, (Will be prepared by buyer)
(19). Heating method of the glue melting box:   Electric heating.
(20). Heating method of the die slot heads and the glue transfusion tubes:     Electric heating.